Oki 2024E manual Control Panel Lights, Ready LED Green

Page 27

Control Panel Lights

Ready LED (Green)

On

The printer is on line.

Off

The printer is off line.

Flashing

The printer is receiving data.

Attention LED (Red)

On: Warning!

The printer needs attention, but can continue to operate.

The display message indicates the nature of the problem: e.g., TONER LOW, PAPER NEAR END, etc.

Off

Normal.

Blinking: Alarm!

The printer needs attention immediately.

The display message indicates the nature of the problem: e.g., PAPER JAM, TRAY1 EMPTY, etc.

26

Image 27

Contents Page Contents Ordering Replacement Supplies How to OrderOrder Numbers Media Settings Why Change Media Settings?Default Media Settings Ranges for Printer Media Weight Settings Media Settings for Individual Print JobsChanging Default Media Settings Trays 1, 2 To Set Transparencies as the Default MediaTo Set Labels, Heavy Paper, etc., as Default Media Changing Default Media Settings Multi-Purpose MP Tray First, Check/Set the Media Size to Letter Default or A4Then, Set the Media Type First, Check/Set the Media Changing Default Media Settings Multi-Purpose TrayTo Set Labels or Heavy Paper as the Default Media Then, Set the Media WeightSizes must be defined in driver before printing Loading Media Trays 1, 2Loading Media Multi-Purpose MP Tray Selecting/Using Paper Default SpecificationsFor Individual Print Jobs on Transparencies Selecting/Using TransparenciesMaking Transparencies the Default Print Media Printing TransparenciesPrinting Labels Selecting/Using LabelsMaking Labels the Default Print Media for the MP Tray Label ParametersPrinting Thick Paper Selecting/Using Thick MediaSample Ream Label ParametersTo Print an Individual Job on Envelopes Selecting/Using EnvelopesMaking Envelopes Default Print Media for MP Tray Printing EnvelopesSelecting/Using OKI Print Media Overlays Forms Ideas for Using Printer FeaturesSecure Print Feature Proof & Print FeatureTo Print a Confidential Document Using Control Panel Secure PrintTo Delete Document before Printing It Proof & Print To Print a Proofed Document Using Control PanelPrinting the Menu Defaults MenuMap Printing Built-In ReportsPrinting the File List Printing Lists of Fonts Printing the DemoTo Disable/Enable Power Save Setting Power Save ParametersPower Save Setting the Power Save IntervalControl Panel Buttons Menu ButtonOn Line Button Value Button Item + ButtonItem Button Value + ButtonPrinter On Line Cancel ButtonError Mode Attention light blinking Select ButtonReady LED Green Control Panel LightsJam Clearing Media JamsCheck Duplex 371 Paper JAM Check Duplex 372 Paper JAM Open Front Cover 380 Paper JAM Do not touch the shiny green area on the bottom of the drums If the sheet is visible If the sheet is inside If the sheet is inside and caught in the fuser Jam 382Open Upper Cover 383 Paper JAM Clearing Paper Jams Jams 392 Changing Toner Cartridges Toner Cartridge Order #sOff Back On Error Messages On Line Fuser is not properly installed Press the on Line button Service & Support First …Additional OKI Resources