Epson TM-T88II Series user manual Auto cutter problems, Auto cutter is jammed

Page 31

4.Then turn the knob until you see in the opening, as shown in the illustration below. This returns the cutter blade to the normal position. Also notice that there is a label near the cutter to assist you.

ADJUSTMENT:

TURN KNOB UNTIL YOU SEE TRIANGLE IN OPENING

 

 

POW

ER

 

 

ERR

F

 

OR

 

PAPERT

 

OU

 

 

EED

 

 

5.Close the cutter cover.

6.Open the printer cover.

7.Remove the jammed paper.

Auto cutter problems

The auto cutter is jammed.

If a foreign object, such as a push pin or paper clip, drops in the auto cutter and causes the auto cutter to lock up, the printer enters an error state and begins the recovery operation automatically.

If the problem is not serious, the auto cutter returns to its normal position without any intervention by the user.

Troubleshooting 3-5

Image 31
Contents TM-T88II Series Der Thermalkopf ist heiß Printer Parts and LabelsLabels Thermal head is hot La téte thermique est chaudeSolving Problems Installing and Replacing PaperQuick Reference Page Product Name TM-T88II Model Name M129B EMC and Safety Standards AppliedIii FCC Compliance Statement CE MarkingFor American Users Gereäuschpegel About This Manual Setting Up and UsingReference Application Software FeaturesIntroduction PrintingViii Introduction Options and AccessoriesContents Appendix a DIP Switch and Paper Near End Settings Setting Up the Printer Setting Up the PrinterUnpacking Connecting the computer Connecting the Cables and Grounding the Printer2Setting Up the Printer Connecting the Drawer Anschließen der Schublade 4Setting Up the PrinterGrounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Running the self test Using the Power Switch Cover10Setting Up the Printer Self TestSelf test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and SettingsControl Panel Using the PrinterUsing the Printer Operating the Control PanelPanel lights 2Using the PrinterPrinting problems TroubleshootingTroubleshooting General problems2Troubleshooting Error light is off, but nothing is printedPrinting is poor Paper handling problems Cleaning the print headPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems6Troubleshooting Hexadecimal Dump 8Troubleshooting Reference Information Printing SpecificationsReference Information 2Reference Information Line spacing default 4.23 mm 1/6Paper roll Paper SpecificationsSingle-ply Current Electrical CharacteristicsConsumption at Life TemperatureReliability Environmental Conditions6Reference Information Serial interface specifications DIP Switch and Paper Near End SettingsSetting the DIP Switches DIP switch functions2DIP Switch and Paper Near End Settings Print Density Selection DIP Switch and Paper Near End Settings A-34DIP Switch and Paper Near End Settings Parallel interface specificationsDIP Switch and Paper Near End Settings A-5 6DIP Switch and Paper Near End Settings Changing the DIP switch settingsDIP Switch and Paper Near End Settings A-7 Adjusting the Paper Near End Detector1999.12