Epson TM-T88II Series user manual Line spacing default 4.23 mm 1/6, 2Reference Information

Page 36

Printing speed — Approximately 42 mm/ second

when a ladder bar (approximately 1.7’’/ second) code is printed:

Notes:

Printing speed may be slower, depending on the data transmission speed and the combination of control commands.

There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, it is recommended that you use a downloaded bit image. (Changes in printing speed do not occur during downloaded bit image printing).

Paper feeding speed: Approximately 120 mm/second (approximately 4.72”/second) continuous paper feeding

Line spacing (default): 4.23 mm (1/6”)

Programmable by control command.

Number of characters: Alphanumeric characters: 95 International characters: 32

Extended graphics: 128 7 pages (including one space page)

Kanji characters: JIS-Level 1, Level 2 (JIS X0208-1990)

Character structure: Font A: 12 24 (including 2-dot spacing horizontally)

Font B: 9 17 (including 2-dot spacing horizontally)

Kanji: 24 24

Font A is the default

4-2Reference Information

Image 36
Contents TM-T88II Series Printer Parts and Labels LabelsThermal head is hot La téte thermique est chaude Der Thermalkopf ist heißInstalling and Replacing Paper Solving ProblemsQuick Reference Page EMC and Safety Standards Applied Product Name TM-T88II Model Name M129BIii CE Marking FCC Compliance StatementFor American Users Gereäuschpegel Setting Up and Using About This ManualReference Features IntroductionPrinting Application SoftwareOptions and Accessories Viii IntroductionContents Appendix a DIP Switch and Paper Near End Settings Setting Up the Printer Setting Up the PrinterUnpacking Connecting the Cables and Grounding the Printer Connecting the computer2Setting Up the Printer Connecting the Drawer 4Setting Up the Printer Anschließen der SchubladeConnecting the Power Supply Grounding the PrinterPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Using the Power Switch Cover 10Setting Up the PrinterSelf Test Running the self testSelf test printing Please press the Paper Feed button Adjustments and Settings 12Setting Up the PrinterUsing the Printer Using the PrinterOperating the Control Panel Control Panel2Using the Printer Panel lightsTroubleshooting TroubleshootingGeneral problems Printing problemsError light is off, but nothing is printed 2TroubleshootingPrinting is poor Cleaning the print head Paper handling problemsPaper is jammed inside the printer 4Troubleshooting Auto cutter problems Auto cutter is jammed6Troubleshooting Hexadecimal Dump 8Troubleshooting Printing Specifications Reference InformationReference Information Line spacing default 4.23 mm 1/6 2Reference InformationPaper Specifications Paper rollSingle-ply Electrical Characteristics CurrentConsumption at Temperature ReliabilityEnvironmental Conditions Life6Reference Information DIP Switch and Paper Near End Settings Setting the DIP SwitchesDIP switch functions Serial interface specifications2DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-3 Print Density SelectionParallel interface specifications 4DIP Switch and Paper Near End SettingsDIP Switch and Paper Near End Settings A-5 Changing the DIP switch settings 6DIP Switch and Paper Near End SettingsAdjusting the Paper Near End Detector DIP Switch and Paper Near End Settings A-71999.12