FENIX IMVICO | TK14 OPERATION MANUAL |
•If this command is not received at the beginning of a line, and the character font is to be changed, all previous data in the print buffer is printed and the ticket is placed at the beginning of the next line..
[Default] | n = <00>H |
|
|
|
|
|
[Reference] | ESC M, GS !, APPENDIX A | |||||
ESC 2 |
|
|
|
|
|
|
[Name] | Select default line spacing |
|
|
| ||
[Format] | ASCII | ESC | 2 |
|
|
|
| Hex | 1B | 32 |
|
|
|
| Decimal | 27 | 50 |
|
|
|
[Description] | Selects 0.93 mm (15 x 0.0625 mm) line spacing. | |||||
[Reference] | ESC 3. |
|
|
|
|
|
ESC 3 n |
|
|
|
|
|
|
[Name] | Set line spacing |
|
|
|
| |
[Format] | ASCII | ESC | 3 | n | ||
| Hex | 1B | 33 | n | ||
| Decimal | 27 | 51 | n | ||
[Range] | <00>H ≤ n ≤ | <FF>H |
|
|
|
|
[Description] | Sets the line spacing to [n x 0.0625 mm]. | |||||
[Default] | n = 15 |
|
|
|
|
|
[Reference] | ESC 2 |
|
|
|
|
|
ESC @ |
|
|
|
|
|
|
[Name] | Initialize printer |
|
|
|
| |
[Format] | ASCII | ESC | @ |
|
|
|
| Hex | 1B | 40 |
|
|
|
| Decimal | 27 | 64 |
|
|
|
[Description] | Clears the data in the print buffer and resets the printer settings to the settings that were | |||||
| in effect when the power was turned on. | |||||
[Notes] | The data in the receiver buffer is not cleared. | |||||
ESC E n |
|
|
|
|
|
|
[Name] | Turn emphasized mode on/off | |||||
[Format] | ASCII | ESC | E | n | ||
| Hex | 1B | 45 | n | ||
| Decimal | 27 | 69 | n | ||
[Range] | 0 ≤ n ≤ 255 |
|
|
|
|
|
[Description] | Turns emphasized mode on or off | |||||
| When the LSB of n is 0, emphasized mode is turned off. | |||||
| When the LSB of n is 1, emphasized mode is turned on. | |||||
[Notes] | Only the least significant bit of n is enabled. |
•This command and ESC ! turn on and off emphasized mode in the same way. Be
| careful when this command is used with ESC !. | |||
[Default] | n = 0 |
|
|
|
[Reference] | ESC !, ESC G |
|
|
|
ESC G n |
|
|
|
|
[Name] | Turn on/off |
| ||
[Format] | ASCII | ESC | G | n |
| Hex | 1B | 47 | n |
| Decimal | 27 | 71 | n |
[Range] | 0 ≤ n ≤ 255 |
|
|
|
[Description] | Turns | |||
| When the LSB of n is 0, | |||
| When the LSB of n is 1, | |||
[Notes] | Only the lowest bit of n is enabled. | |||
| • Printer output is the same in | |||
[Default] | n = 0 |
|
|
|
[Reference] | ESC E |
|
|
|
34/65