FENIX IMVICO | TK14 OPERATION MANUAL |
0 – INTRODUCTION
The TK14 is a high performance thermal printer. Its compact and functional design covers many professional uses (as in supermarkets, hotels, hospitals, restaurants, and so on.)
It is capable of printing text, graphics, logo and barcodes.
It can be used in laboratories, industrial and professional environments. The main features of the TK14 are:
•Simple installation and easy maintenance.
•Low noise thermal printing.
•
•Paper width: 58 mm.
•High reliability: 100 million pulses. Abrasion resistance: 50 Km.
•Power supply: 12V to 24V DC.
•
•Up to 80 mm paper roll diameter.
•High speed printing up to 62,5mm/s.
•Printing resolution: 8 dots/mm (203 dpi).
•Passive cut of paper.
•Nozzle ticket presenter.
•IEEE 1284 parallel and serial RS232C data input interface
•Two internal character fonts (A font = 12x24 dots. B font = 8x16 dots).
•Scalable font (independent scale in
•Programmable character and line space.
•Bold and reverse character capabilities
•Graphic bitmap printing capabilities.
•Several format Bar Code (EAN13, Code39, Code128 and ITF)
•Control code based on ESC/POS commands (*).
•Hexadecimal mode for easy software debugging.
•Automatic paper load.
•Extended operating temperatures range
•Self test, hexadecimal mode and configuration mode features.
•One logo load capability, through Windows driver.
•Windows 95, 98 & 2000 drivers and demo/configuration program.
This manual is the printer operations’ guide and is intended for the application designer. The following sections contain a detailed description of both the hardware and the configuration software that allow obtaining the maximum benefit of the printer possibilities.
(*) ESC/POS are registered trademarks of Seiko Epson Corporation.
8/65