Epson TK14 operation manual ESC c 5 n, ESC d n, ESC 2, ESC GS ! n

FENIX IMVICO					TK14 OPERATION MANUAL
ESC c 5 n
[Name]	Enable/disable panel buttons
[Format]	ASCII	ESC	c	5	n
	Hex	1B	63	35	n
	Decimal	27	99	53	n
[Range]	0 ≤ n ≤ 255
[Description]	Enables or disables the panel buttons.

•When the LSB of n is 0, the panel buttons are enabled.

•When the LSB of n is 1, the panel buttons are disabled.

[Notes]	Only the lowest bit of n is valid.
	• In this printer, only the FEED button can be disable.
[Default]	n = 0
ESC d n
[Name]	Print and feed n lines
[Format]	ASCII	ESC	d	n
	Hex	1B	64	n
	Decimal	27	100	n
[Range]	<00>H ≤ n ≤	<FF>H
[Description]	Prints the data in the print buffer and feeds n character lines.
[Notes]	This command sets the print starting position to the beginning of the line.

•This command does not affect the line spacing set by ESC 2 or ESC 3.

•The maximum paper feed amount is 1016 mm {40”}. If the paper feed amount (n x line spacing) of more than 1016 mm {40”} is specified, the printer feeds the paper only 1016 mm {40”}.

•Every line feed corresponds to the current selected font height (24 dots for Font A and 16 dots for Font B).

[Reference]	ESC 2, ESC 3.
GS ! n
[Name]	Select character size
[Format]	ASCII	GS	!	n
	Hex	1D	21	n
	Decimal	29	33	n
[Range]	<00> ≤ n ≤	<FF>H (1 ≤	vertical number of times ≤ 8, 1 ≤ horizontal number of times ≤ 8)

[Description] Selects the character height using bits 0 to 3 and selects the character width using bits 4 to 7, as follows:

Bit	OFF / ON	Hex	Function
0	Character height selection. See Table 2.
1
2
3
4	Character width selection. See Table 1.
5
6
7

Table 1 Character Width Selection

Hex	Width
00	1	(normal)
10	2	(double-width)
20	3
30	4
40	5
50	6
60	7
70	8

Table 2

Character Height Selection

Hex	Height
00	1	(normal)
01	2	(double-height)
02	3
03	4
04	5
05	6
06	7
07	8

37/65