Canon 8200 manual Is everything ready?, Have you completed setting up the printer?

Page 11

Chapter

1 Printing

Make sure that you have read the Quick Start Guide and completed all the steps to set up the printer and prepare it for operation. This chapter describes how to print a photograph and how to use the optional Scanner Cartridge.

Is everything ready?

Before you begin, make sure that you have everything that you need.

Have you completed setting up the printer?

Make sure that the printer has been set up completely and that the print head has been aligned. If you have not performed all of these procedures, you must follow the instructions in the Quick Start Guide to set up printer and align the print head.

●BJ Print Head and ink tanks installed?

●Printer cable connected to the printer and computer?

●Is the printer driver installed?

●Has the print head been aligned?

Is the printer ready to print?

●Is the printer switched on?

When the printer is switched on, the POWER/ERROR lamp flashes green for a few seconds then lights steadily green. When the POWER/ERROR lamp lights and remains on, the printer is ready to print. If the POWER/ERROR lamp flashes or lights orange, an error has occurred. For details, see Chapter 4.

●Is the printer cable securely connected to the printer and computer?

If the printer cable is not connected to the printer and computer correctly, an error can occur or meaningless characters could print.

Memo

ON

The buttons and lamp for manually operating the printer are located on the operation panel.

q w e

1POWER button

Press to switch the printer on and off.

2POWER/ERROR lamp

When you switch on the printer, the POWER/ERROR lamp lights, green. If this lamp lights or flashes orange, an error has occurred.

Off	Printer is switched off.

Lights Green	Printer is ready.

Flashes Green	Printer is warming up after power on, or is
	receiving a print job from the computer.

Lights Orange	Printing has stopped because an error has
	occurred.
Flashes Orange	Call for service.

3RESUME button

Press the RESUME button to cancel errors after removing the problem so the printer can resume normal operation.

10

Image 11

Contents QA7-0884-V01 User’s GuideConventions Always push the plug completely into the power outlet Using the Printer SafelyNever place the printer on a thick carpet or rug Never attempt to disassemble or modify the printerNever use flammable sprays near the printer Never use an extension cord Always grasp the plug when you unplug the power cordBJ Print Head and ink tanks Table of Contents Specifications Canon Technical Support Adjusting color Printout is unclear, fadedUser’s Guide on CD-ROM About your guidesQuick Start Guide On-line Help Reference Guides on CD-ROMIs the printer ready to print? Have you completed setting up the printer?Is the printer switched on? Is everything ready?Summary of printing photographs Printing photographsPrinting a photograph in Windows 98, Windows Make sure that the printer is switched onClick the OK button to start the print job Click the Properties buttonPrinting Printing a photograph with the Macintosh Make sure the printer is switched onClick the Print button Click the Photo icon for the Print Mode PrintingSelect the Media Type for your print job What you need Using the Scanner CartridgeSummary of the scanning procedures Close the front cover Install the Color Image Scanner Cartridge IS-52Switch on the printer and open the front cover Set the white level calibration sheet Perform white level calibrationClick the Scan button Scan the original photographClick the OK button Saving the scanned image Install the BJ Print Head and print the imageStart the print job Insert the white calibration sheet in the printer Click the Cancel buttonClick the OK button Set the original in the scanning holder Click the Close box to close is Scan Enter a file name and click the Save buttonClose the software application Close the front cover Set the media in the printerNow let’s print a digital photograph Summary of the procedure for printing a digital photographPrinting a photograph from a digital camera Starting the print job Perform the printer driver settingsSave to a file the photograph taken with the digital camera Set the media in the printerMake sure that the Print dialog is for the BJC-8200 Click the Photo icon for the Print Mode selectionOperation Flow Using the Printer DriverOpening the printer driver Using the Printer DriverLayout tab Maintenance tabSelecting the printer driver options Main tabDriver Choosing a print modeUsing the Printer Selecting a media typeChanging the page size Open the Utilities dialog box Open the Paper Setting dialog boxPrinter Utility dialog box Setup dialog boxPrint dialog box Manual Selecting a print modeGraphic PhotoChanging the paper size Loading Paper Canon media for quality image printing Load limit and Paper Thickness Lever position Paper thicknessPaper or media you should never load in the printer With the glossy side facing up, place the sheet of Photo Setting media correctlyLoading Photo Paper Pro PR Raise the paper thickness lever to MarkSlide the paper guide to the left edge of the stack Loading plain paper or High Resolution Paper HRTray Is alignedInsert the sheet into the printer until it stops Loading High Gloss Photo Film HGTray Slide the paper guide completely to the left Photo Film with the right side of the sheet feederLoading Glossy Photo Paper GP Loading Glossy Photo Cards FM Slide the paper guide to left edge of the stack Loading EnvelopesBanner Paper BP-101 Other media for creative printingTransparencies CF-102 Shirt Transfer TR-201Troubleshooting Here is an overview of what is described in this chapterConfirm that the CD-ROM is operating normally Cannot install the printerMake sure the driver was installed correctly Other software applications are running in the backgroundPrinter prints meaningless characters and symbols During printing, rapidly press the Power button twice Cancelling a print jobPrinting on thick paper Setting thick paper for printingPaper or media jammed during auto feed Follow the procedure below to clear a paper jamPaper Jams Paper jammed during manual feed Open the BJ Print Monitor to confirm the low ink alert Low ink alertPossible Beeps Printer beeps and it does not printBJ Status Monitor and BJ Print Monitor Error Messages Error message appearsOperating System Errors Printing quality is unsatisfactory Using the recommended paper or special mediaChanging the printer driver settings Adjusting the print mode settingsOpen the Print dialog box, click Adjusting the Detailed SettingImproving print quality with the Photo Optimizer Aligning the print head Read the message and click the OK button Properties Click the Maintenance tab then click PrintHead Alignment icon Click the Send button Read the message and click the OK button to continueHorizontal Alignment Reading the print head alignment patternAdjusting color Printout is unclear, faded Summary of correcting the problemPrinting a nozzle check pattern Click the Nozzle Check Pattern icon Software application from the File menu, select Page SetupClick the down-arrow to select Test Print Cleaning the print head Software application, from the File menu, select Setup Deep cleaning the print head Click Print head deep cleaning icon Remove the empty ink tank Replacing an ink tankCheck the positions of the ink tanks in the BJ Print Head After cleaning the print head, print a nozzle check patternColor is strange Check the position of the ink tanks in the BJ Print HeadScanner Cartridge does not operate correctly When connected via USBIs the scanner driver installed correctly? Replace the BJ Print Head Replacing the BJ Print HeadReplacing an ink tank P.74 Appendices SpecificationsRecommended printing area width x height Canon Technical Support About the operating environment Canon INC