Canon 8200 manual Loading plain paper or High Resolution Paper HR, Tray, Is aligned

Loading Paper and Special Print Media

Loading plain paper or High Resolution Paper HR - 101

1.	Raise the paper thickness lever to the	mark.
2.
	Raise the paper rest, lower and pull out the paper output
	tray.
3.
	Fan the edges of the sheets to remove static cling. Tap
	the edges of the stack against a flat surface so the stack
	is aligned.

• To prevent paper jams, always fan the sheets and

Caution

align the edges before you load them in the sheet feeder.

•Handle media carefully by its edges. Never touch the print surface of the sheets. Dirt or fingerprints on the print surface will adversely affect print quality.

•When you use the High Resolution Paper, do not touch the whiter print side.

4. Slide the paper guide completely to the left.

5. With the whiter side facing up, align the stack with the

Special Print Media

right side of the sheet feeder and set the stack in the printer.

Whiter Side

and

•	You can load up to 100 sheets (64 gsm) of plain paper
Memo	or 80 sheets of High Resolution Paper in the sheet
	feeder at one time.

• Do not allow plain paper and High Resolution

Caution

Paper to stack higher than 50 sheets on the paper output tray.

•To prevent warping and bending of the paper, do not leave High Resolution Paper set in the sheet feeder for a long time.

•If you print on the paper wider than 216 mm, make sure you select the Envelope for the Media Type on the printer driver.

6.Slide the paper guide to the left edge of the stack.

Loading Paper

43