Canon 8200 manual Recommended printing area width x height

Page 81

Printing Area

To ensure the best quality printing, documents should be printed within the border defined by the top, bottom, left, and right margins described below. Please note that the printable area varies with the paper size. The table below describes the printing area for A5, A4, and B5.

• For details about the defined printing area for other print media, refer to the instructions enclosed with the

Reference

print media package.

 

The illustration shows the recommended printing area and the printable areas.

Indicates the recommended printing area to ensure best quality.

Indicates printable area where printing is possible but where print quality and precision paper feed cannot always be guaranteed.

Recommended printing area (width x height)

 

Units: mm

A5

141.2 x 202.0

A4

203.2 x 289.0

B5

175.2 x 249.0

Color Image Scanner Cartridge IS-52 Specifications (option)

 

Scanning method

Sheetfed Scanner (Band method)

 

 

 

Scanning sensor

CCD

 

 

 

 

Light source

3-Color LED (RGB)

 

 

 

 

Scanning resolution

600 x 600 dpi, 300 x 300 dpi, 200 x 200 dpi, 150 x 150 dpi, 75 x 75 dpi

 

Scanning width (max.)

208.2 mm (8.2 in.)

 

 

 

 

Scanning band width (max.)

10.8 mm (0.43 in.)

 

 

 

 

Scanning time1

600 dpi

300 dpi

150 dpi

75 dpi

 

A4

Color

12 min. 50 sec.

4 min. 37 sec.

4 min. 21 sec.

3 min. 18 sec.

 

 

Monochrome (B & W)

1 min. 25 sec..

45 sec.

37 sec.

37 sec.

 

 

Monochrome grayscale

4 min. 20 sec.

1 min. 36 sec.

1 min. 18 sec.

1 min. 9 sec.

 

Original thickness

0.25 mm (.01 in.) max.

 

 

 

Output data

B/W: Binary

 

 

 

 

 

 

Color: 24-bit

 

 

 

 

 

 

Grayscale: 8-bit

 

 

 

 

Dimensions

83 x 82 x 76 mm (w x d x h) approx.

 

 

 

 

 

3.3 x 3.2 x 2.9 in. (w x d x h) approx.

 

 

 

Weight

 

150 g

 

 

 

 

Scanner device driver

IS Scan (TWAIN-compatible)

 

 

 

Operating Environment

 

 

 

 

 

 

Operating System

Windows 98, Windows 95, Windows NT 4.02, Mac 0S 8.1 (or higher)

 

 

Interface

Parallel (IEEE 1284 Standard), USB

 

 

 

 

Display

256 colors or more

 

 

 

 

 

Memory

16 MB RAM (32 MB or more recommended)

 

 

 

Disk space

50 MB (more recommended)3

 

 

1. The time measurement does not include the time required data transfer to the computer, paper loading time, or paper eject time. 2. The USB interface is compliant with Windows 98 only.

3. At installation the following amount of space should be available on the hard disk:

For Windows, 5 MB should be available for IS Scan and 10 MB available for IS Scan Plus. For Mac OS, 8 MB should be available for IS Scan and 400 KB available for Copy Utility.

80

Image 81
Contents QA7-0884-V01 User’s GuideConventions Always push the plug completely into the power outlet Using the Printer SafelyNever attempt to disassemble or modify the printer Never use flammable sprays near the printerNever place the printer on a thick carpet or rug Never use an extension cord Always grasp the plug when you unplug the power cordBJ Print Head and ink tanks Table of Contents Specifications Canon Technical Support Adjusting color Printout is unclear, fadedAbout your guides Quick Start GuideUser’s Guide on CD-ROM On-line Help Reference Guides on CD-ROMIs the printer switched on? Have you completed setting up the printer?Is everything ready? Is the printer ready to print?Summary of printing photographs Printing photographsPrinting a photograph in Windows 98, Windows Make sure that the printer is switched onClick the Properties button PrintingClick the OK button to start the print job Printing a photograph with the Macintosh Make sure the printer is switched onClick the Photo icon for the Print Mode Printing Select the Media Type for your print jobClick the Print button What you need Using the Scanner CartridgeSummary of the scanning procedures Install the Color Image Scanner Cartridge IS-52 Switch on the printer and open the front coverClose the front cover Set the white level calibration sheet Perform white level calibrationScan the original photograph Click the OK buttonClick the Scan button Saving the scanned image Install the BJ Print Head and print the imageStart the print job Insert the white calibration sheet in the printer Click the Cancel buttonClick the OK button Set the original in the scanning holder Click the Close box to close is Scan Enter a file name and click the Save buttonClose the software application Close the front cover Set the media in the printerSummary of the procedure for printing a digital photograph Printing a photograph from a digital cameraNow let’s print a digital photograph Save to a file the photograph taken with the digital camera Perform the printer driver settingsSet the media in the printer Starting the print jobMake sure that the Print dialog is for the BJC-8200 Click the Photo icon for the Print Mode selectionOperation Flow Using the Printer DriverOpening the printer driver Using the Printer DriverSelecting the printer driver options Maintenance tabMain tab Layout tabUsing the Printer Choosing a print modeSelecting a media type DriverChanging the page size Open the Utilities dialog box Open the Paper Setting dialog boxSetup dialog box Print dialog boxPrinter Utility dialog box Graphic Selecting a print modePhoto ManualChanging the paper size Loading Paper Canon media for quality image printing Paper thickness Paper or media you should never load in the printerLoad limit and Paper Thickness Lever position Loading Photo Paper Pro PR Setting media correctlyRaise the paper thickness lever to Mark With the glossy side facing up, place the sheet of PhotoTray Loading plain paper or High Resolution Paper HRIs aligned Slide the paper guide to the left edge of the stackTray Slide the paper guide completely to the left Loading High Gloss Photo Film HGPhoto Film with the right side of the sheet feeder Insert the sheet into the printer until it stopsLoading Glossy Photo Paper GP Loading Glossy Photo Cards FM Slide the paper guide to left edge of the stack Loading EnvelopesTransparencies CF-102 Other media for creative printingShirt Transfer TR-201 Banner Paper BP-101Troubleshooting Here is an overview of what is described in this chapterMake sure the driver was installed correctly Cannot install the printerOther software applications are running in the background Confirm that the CD-ROM is operating normallyPrinter prints meaningless characters and symbols During printing, rapidly press the Power button twice Cancelling a print jobPrinting on thick paper Setting thick paper for printingFollow the procedure below to clear a paper jam Paper JamsPaper or media jammed during auto feed Paper jammed during manual feed Low ink alert PossibleOpen the BJ Print Monitor to confirm the low ink alert Beeps Printer beeps and it does not printBJ Status Monitor and BJ Print Monitor Error Messages Error message appearsOperating System Errors Changing the printer driver settings Using the recommended paper or special mediaAdjusting the print mode settings Printing quality is unsatisfactoryAdjusting the Detailed Setting Improving print quality with the Photo OptimizerOpen the Print dialog box, click Aligning the print head Properties Click the Maintenance tab then click Print Head Alignment iconRead the message and click the OK button Click the Send button Read the message and click the OK button to continueHorizontal Alignment Reading the print head alignment patternAdjusting color Printout is unclear, faded Summary of correcting the problemPrinting a nozzle check pattern Software application from the File menu, select Page Setup Click the down-arrow to select Test PrintClick the Nozzle Check Pattern icon Cleaning the print head Software application, from the File menu, select Setup Deep cleaning the print head Click Print head deep cleaning icon Remove the empty ink tank Replacing an ink tankColor is strange After cleaning the print head, print a nozzle check patternCheck the position of the ink tanks in the BJ Print Head Check the positions of the ink tanks in the BJ Print HeadWhen connected via USB Is the scanner driver installed correctly?Scanner Cartridge does not operate correctly Replace the BJ Print Head Replacing the BJ Print HeadReplacing an ink tank P.74 Appendices SpecificationsRecommended printing area width x height Canon Technical Support About the operating environment Canon INC