AXIS 1610 User’s Manual | Section 3: Installation | 19 |
|
|
|
Using ARP in
Windows 95/98, ME
& Windows NT, 2000
Notes:
Follow the instructions below to set the IP address using ARP:
1.Start a DOS window.
Type the following commands:
arp
arp
Example
arp
arp
The host will return Reply from 192.168.3.191 ... or a similar message. This indicates that the address has been set and that the communication is established.
❏When using the Windows 95 implementation of ARP, change the
first line to:
arp
address>, where <w95host IP address> is the IP address of your Windows 95 host.
❏When you execute the ping command for the first time, you will experience a significantly longer response time than usual.
❏By using the arp