32 | Section 4: Management & Configuration | AXIS 1610 User’s Manual |
|
|
|
Section 4 Management & Configuration
Configuration Overview
The management and configuration tools that are supported by the AXIS 1610 allow you to:
•Change the print server parameters, i.e. editing the config file
•Receive extended information about the print jobs
•Receive printer port status
•Monitor your printers
•Reset the AXIS 1610
•Upgrade the AXIS 1610 firmware (Refer to Section 5 Upgrading the Firmware, on page 50)
The method you should use to manage and configure your AXIS 1610 is dictated by the operating system protocols of your network. The table below displays which method to use for supported network protocols:
Network Protocols | Configuration/Management methods | ||
|
|
| |
| • | Web Browser - See page 33 | |
TCP/IP | • | Netspot - See page 36 | |
• | FTP - See page 44 | ||
| |||
| • | SNMP - See page 47 | |
NetBIOS/NetBEUI | • | AXIS NetPilot - See page 37 | |
IPX | • | AXIS NetPilot - See page 37 | |
• | Netspot - See page 36 | ||
| |||
|
|
|