26 | Section 3: Installation | AXIS 1610 User’s Manual |
|
|
|
Using
AXIS Print Monitor
in Windows NT,
Windows 2000
and Windows XP
Follow the procedure below to install TCP/IP Ports from a Windows NT, 2000 or XP workstation:
1.Install the AXIS Print Monitor on your workstation. The software is available on the AXIS Product Resources CD.
2.To start the Add Printer Wizard, select Settings Printers from the Start menu and
3.Select My Computer, as the AXIS 1610 emulates a local printer port and click Next>
4.If the TCP/IP port you want to use appears in the Available Ports list, you can proceed to step 7. If the port does not appear in the list, click Add Port / Create a new port. Select AXIS CAPT Port from the
5.Select TCP/IP as your choice of network printing protocol and click OK.
6.From the Add Port dialog, enter the IP address / host name of the print server and click Add.
7.The port will be added to the list and highlighted. Click OK to return to the printer ports dialog and click Close.
8.Select the TCP/IP port you wish to use and click Next>
Note: The port will appear in the format <name>_TCP/IP:, where <name> is, by default, AXIS followed by the last six digits of the Axis print server’s serial number (e.g. AXIS560B35_TCP/IP:)
9.Choose an appropriate printer driver for your printer.
Note: If the desired driver appears in the displayed manufacturer and models list dialog, highlight your selection, click Next> and proceed directly to step 12.
10.If the desired printer driver is not available, click Have Disk... and insert the printer driver CD that was provided with your printer. Select the CD drive and click OK.
11.Select the printer driver you want to install from the CD and click
Next>
12.Enter a descriptive name for your printer and click Next>