AXIS 1610 User’s Manual | Section 3: Installation | 31 |
|
|
|
The AXIS NetPilot Installation Wizard guides you through the installation process. The following options are available:
Printer Port Name The default printer port name consists of <name>, where <name> is AXIS followed by the last six digits of the AXIS 1610 serial number, e.g. AXIS100086. If you want to change the default printer name, just type the new name in the available text field. The maximum length of the printer port name is 15 characters. If you enter more than 15 characters, the name will be truncated.
IP address If you want to assign an IP address to your AXIS 1610, indicate which method the AXIS 1610 should employ for obtaining an IP address. DHCP, ARP, RARP and BOOTP are supported. You can also set the IP address manually. Refer to Assigning an IP address, on page 16 for more information.
Set Configuration The final user prompt in the Installation Wizard allows you to Password set a password that protects the AXIS 1610 parameters and
settings from unauthorized users.
Notes: ❏ The parameters entered during installation are not permanent, they can be altered at any time according to your network printing requirements.
❏No serious or permanent damage will be caused if you make a mistake during installation. If at any time you find that printing is not satisfactory, the parameters can easily be changed to tune the system to your requirements.