Canon AXIS 1610 user manual Appendix a The Parameter List, Logged in to the Axis 1610 using root

52 Appendix A: The Parameter List AXIS 1610 User’s Manual

Appendix A The Parameter List

The left-hand column shows the parameters and their default values as they appear in the config file and the right-hand column shows the name of the parameters as they appear in the internal Web pages.

Please refer to Section 4 Management & Configuration, on page 32, for more information about how to change the parameters.

Note:	❏ The password parameter, ROOT_PWD, only appears when you are
	logged in to the AXIS 1610 using root.
	--- GENERAL MENU
	NETWORK_SPEED.: AUTO_SENSE			AUTO_SENSE, 10_HALF_DX, 100_HALF_DX
	PS_NAME.	: AXIS100086		Print Server Name (‘AXIS’ followed by the last six digits of the
				serial number)
	ROOT_PWD.	: pass		Root Password
	SYS_LOC.	:		System Location
	SYS_CONT.	:		System Contact
	--- TCP/IP MENU
	TCP_ENB.	: YES		TCP/IP printing enabled
	INT_ADDR.	:	0 0 0 0	Internet Address
	DEF_ROUT.	:	0 0 0 0	Default Router Address
				(0.0.0.0 for no router)
	NET_MASK.	:	0 0 0 0	Net Mask
				(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
	DHCP_ENB.	: YES		DHCP Enabled
	BOOTP_ENB.	: YES		BOOTP Enabled
	RARP_ENB.	: YES		RARP Enabled
	WINS_ENB.	: YES		WINS Enabled
	WINS_ADDR1.	: 0 0 0 0		Primary WINS server Address
	NBT_SCOPE ID. :			NBT Scope ID
				(Defines the NetBIOS scope to be used with WINS name
				registration)

---SNMP MENU

TRAPADDR.	: 0 0 0 0	Trap Address
TRAP_COM.	: public	Trap Community
SYS_NAME.	:	System Name

---NetBIOS/NetBEUI Menu

LSLM_ENB. : YES NetBIOS/NetBEUI printing enabled