Canon iR1210G, iR1230G manual Message Action

Message	Action
Communication error	Your computer and printer are not communicating. This happens if
	the printer power shuts off, the cable is disconnected, or the cable is
	not bi-directional.
Printer Error	The Canon Advanced Printing Technology has detected an internal
	device error.
	1 Unplug.
	2 Reinsert the power plug into the power outlet.
	3 If the same error occurs, unplug the power plug again.
	4 If the error persists, contact your Canon authorised service
	representative. ! Reference Guide
Device Busy	The device is being used by another job. Please wait until the job is
	finished.
Port Busy	The printer port is being used by other equipment.
Printing Temporarily	Your computer could not transfer the data to the device due to the
Stopped	large amount of data, or a data transfer error occurred. Click the
	Resume button to resume printing.
Waiting to Print	The current job has been interrupted by another job. Please wait until
	the job is finished. Printing will begin automatically.
Energy Saver Mode	The printer is in the energy saver mode.
Incompatible Device	The connected device cannot be used. Make sure that the device
	connected to the specified port is compatible and connected
	correctly.
Fixing Unit Error	Fixing unit error.
	Unplug the power plug, and then wait about 10 minutes before you
	reinsert the power plug into the power outlet. If the same error
	occurs, unplug the power plug again. Contact your service
	representative.

4

Troubleshooting

4-7