Standby
When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 23 for details.
•If you press standby again within 15 minutes, the projector returns to normal operations immediately.
•If you press standby again after 15 minutes, there is about a 60 second delay before the lamp turns back on.
•If you don’t press standby again, the lamp turns off after 15 minutes.
Volume (keypad only) 
To increase the volume, press volume + 
. To decrease the vol- ume, press volume - 
.
Volume adjustments are saved for each source you have con- nected.
17