Toshiba TDP-B1 warranty Status Menu

Page 30

U s i n g	t h e	P r o j e c t o r

Status Menu

This is a read-only window for informational purposes. To dis- play the status window, select Show status from the menu, then click the left or right navigation button. To remove the window, click the left or right navigation button.

		FIGURE 18
		Status menu
		Lamp hours used
		Indicates how many hours the current lamp has been in use. The
		counter starts at zero hours and counts each hour the lamp is in
		use. Change the bulb when the brightness is no longer accept-
		able. See “Replacing the Projection Lamp” on page 27 for details.
		Computer resolution
		Shows your computer’s resolution setting. To change this, go to
		your computer’s Control Panel and adjust the resolution in the
		Display tab. See your computer’s user’s guide for details.
		Horizontal refresh rate
		The time period that one horizontal line is displayed.
		Vertical refresh rate
		The time period that one video frame is displayed.
		Mute status
		Indicates if the audio is muted.
		Software version
		Indicates the projector’s software version. This information is
		useful when contacting Technical Support.
	26	Source
	26	Indicates the active source, Computer or Video.
		Indicates the active source, Computer or Video.

Image 30

Contents

Table of Contents Appendix IndexSafety Instructions F e t y S t r u c t i o n s Compatibility Image ResolutionIntroduction Unpacking the ProjectorT r o d u c t i o n Usage Guidelines Warranty If You Need AssistanceSetting UP the Projector T t i n g O j e c t o r Connecting a Computer T t i n g O j e c t o r Connecting a Video Player Audio Adapter Composite video cable Audio cableCable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Audio Menu Image Menu I n g O j e c t o r Position and Vert. Position Controls Menu Rear Projection Language Menu Status Menu Maintenance & Troubleshooting Cleaning the LensReplacing the Projection Lamp Pull the lamp door up and remove it Lift and grasp the pull tab and lift the module out Figure Replacing the Batteries in the Remote Control Using the Kensington LockProblem The screen resolution is not right Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem no sound Problem Image is out of focusProblem Image and menus are reversed left to right Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offSpecifications AppendixAccessories Standard Accessories ship with the projectorProjectors.toshiba.com Portable Computer Activation Chart Key command to Computer Activate port De-activate portFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Projected Image Size Index D e Page TDP-B1 Limited Warranty Part Number Safety Certifications Declaration of Conformity