Toshiba TDP-B1 warranty Using Video Mirroring with a PowerBook Computer

Page 47

Using Video Mirroring with a PowerBook Computer

When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display.

To turn on video mirroring for the first time:

1Open the Monitors control panel; click on Monitor 2.

2Set the number of colors you want.

3Open the Control Strip, then click on the monitor icon.

4Select “Turn Video Mirroring On.”

Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again.

When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps:

1Turn off video mirroring.

2Open the Monitors control panel.

3Move the white menu bar to Monitor 2 to set the projector as the primary monitor.

4Restart the PowerBook.

Using SimulScan

Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook

To select SimulScan:

1Open the Control Panel, then double-click Monitors and Sound.

2In the Resolution list, choose the SimulScan mode, then click OK.

3If this changes your display settings, a dialog box appears. Click OK to confirm the change.

43

Image 47

Contents Table of Contents Index AppendixSafety Instructions F e t y S t r u c t i o n s Unpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP the Projector T t i n g O j e c t o r Connecting a Computer T t i n g O j e c t o r Audio Adapter Composite video cable Audio cable Connecting a Video PlayerCable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Remote Control Using the ProjectorBasic Image Adjustment I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Audio Menu Image Menu I n g O j e c t o r Position and Vert. Position Controls Menu Rear Projection Language Menu Status Menu Replacing the Projection Lamp Maintenance & TroubleshootingCleaning the Lens Pull the lamp door up and remove it Lift and grasp the pull tab and lift the module out Figure Using the Kensington Lock Replacing the Batteries in the Remote ControlProblem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem Image is noisy or streaked Problem Image is out of focusProblem Image and menus are reversed left to right Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerAppendix SpecificationsStandard Accessories ship with the projector AccessoriesProjectors.toshiba.com Key command to Computer Activate port De-activate port Portable Computer Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Projected Image Size Index D e Page TDP-B1 Limited Warranty Part Number Safety Certifications Declaration of Conformity