Toshiba TLP-B2 owner manual Connect the power cord, Take off the lens cover

Page 18

 

Floor-mounted projector placement (Continued)

 

 

 

 

CONTENTS

 

 

 

 

 

 

3

Connect the power cord.

 

 

 

• Insert one end in the AC IN socket on the projector.

Control panel on the main unit

 

 

 

• Insert the other end in a wall outlet.

 

Light

Light (Orange)

The ON indicator lights in orange and the projector turns to standby mode. The mark of ON/STANDBY on the main unit will also light.

4 Take off the lens cover.

Push both sides of the lens cover to take off.

18

connectionInstallation and

Notes

•Select a room that can be darkened.

•When the projector is moved from a cold location to a warm location, or when the ambient temperature in the projection room has risen suddenly, moisture may condense on the lens or the mirror to blur the projected pictures. In such a case, leave the projector for an adequate time (1 to 2 hours, depending on the room’s condition) before using it so it adjusts to the ambient temperature.

•If the screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light with curtains or other means.

•If the screen and the projector are not installed properly, the projected picture may be distorted.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TLP-B2ultra U Safety Precautions Before useImportant Precautions Important Safety Instructions Important Safety Instructions HeatUse Object and Liquid EntryCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Foot adjuster Names of each part on the main unitControl connector RS-232C Speaker Exhaust holes AC in socketCT -90038ZOOM Loading a battery Push back the holderRemote control operation Front side Rear sideFloor-mounted projector placement Translucent screen ViewerDetermine the screen size projected on the screen Top viewSide view Connect the power cord Take off the lens coverPush both sides of the lens cover to take off Turn clockwise to lift up Projector placement angle adjustmentHeight Turn counterclockwise to lowerCeiling-mounted rear projection Ceiling-mounted projector placementCeiling-mounted front projection Translucent screenCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOConnecting video equipment CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOProjector operation control by a computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOPress ON/STANDBY Playback modeProjection on the screen OperationsOn the remote control, press RGB or Video Projection on the screenSelect the input source Focus on the picture by turning Focusing ringZooming ring Turn to the right to enlarge the pictureProjector Turning the power offOff, unplug the power cord Press ON/STANDBY againCorrecting the keystone distortion KEY Press KeystoneCutting off the picture and sound temporarily Press MuteFreezing the picture Press FreezeEnlarging the picture size Press Zoom +Quick menu AdjustmentsMenu screen structure Used frequentlyPress Menu Quick menu settingAdjust the item by pressing Press EnterQuick menu setting Menu screen disappearsScreen changes to the full menu screen Pressing Adjustments Adjusting picture Picture adjustmentSelect the setting item Contrast Display the full menu screenAdjusting picture If you adjust other setting item, return to stepAdjusting Image Image adjustment Position To shift the image down -, to up + Adjusting imageMenu button will return to the previous setting screen Clock To remove vertical stripesAdjusting RGB-level Level adjustment Level by pressingAdjusting RGB-level EnterAdjusting audio output Audio adjustment Select, Output select by pressingPress Menu several times until the full Adjusting audio outputAdjust the Volume by pressing Channel selectPower off by pressing Then press Setting the input signal Signal settingMode, No signal background, No signal Setting screen for the item selected appearsNo signal background Picture modeVideo mode No signal power offSetting the input signal Position, Menu background color, On Setting the display method Display settingSelect by pressing / and then press Enter Screen display by pressing / and thenMenu position Setting the display methodChange the selection by pressing Menu background colorDefault setting Power on Default settingProjection mode LanguageMenu Reset, Status display Data setting Status displayDisplay the current operation status Reset, Status display Factory reset modeKeystone reset Trouble indications MaintenanceOn indicator Lamp turns off or does not light upClean the air filter cover Air filter cleaningUnplug the power cord Take off the air filter cover Attach the air filter cover MaintenanceCleaning the main unit Lens and main unit cleaningCleaning the lens Replacing the intake, exhaust fans and air filterTake off the lamp cover on the bottom panel Lamp replacementUnplug the power cord Wait until the lamp gets cold enough Pull out the lampMaintenance Reset the lamp timer Load a new lampAttach the lamp cover Before calling service personal OthersSignal assignment for RGB input Pin arrangementsApplicable RGB signal Timing chartControlling the projector by using RS-232C Interface format Command listControlling the projector by using RS-232C Specifications Main unitAccessories Limited Warranty Toshiba TLP-B2 Series 3LCD Data ProjectorLimited Warranty

TLP-B2 specifications

The Toshiba TLP-B2 is a notable addition to the family of compact and robust thermal printers, designed to meet a variety of business needs. Ideal for retail, hospitality, and healthcare industries, the TLP-B2 combines reliability with efficiency, making it a preferred choice for those seeking versatility in printing.

One of the main features of the TLP-B2 is its impressive print speed. With a maximum print speed of up to 300 mm per second, the printer caters to high-demand environments where fast service is essential. Whether printing receipts or labels, the TLP-B2 ensures minimal delays, which can significantly enhance customer experience.

The Toshiba TLP-B2 leverages advanced thermal printing technology, which means it requires no ink or toner. This not only reduces operational costs but also makes the printer more environmentally friendly. The thermal transfer and direct thermal printing options provide flexible usage, allowing users to choose the method that best fits their requirements.

Connectivity is another key characteristic of the TLP-B2. Equipped with multiple interface options, including USB, Ethernet, and serial interfaces, it seamlessly integrates into existing systems. This versatility ensures that the TLP-B2 can be easily adopted in various settings, whether in standalone applications or part of a larger network.

Durability is a hallmark of the TLP-B2, built to withstand the rigors of everyday use. Its robust design and high-quality components ensure long-lasting performance, while its compact size allows it to fit easily in limited spaces. This balance of durability and size is particularly advantageous for businesses where space is at a premium.

User-friendliness is also emphasized in the TLP-B2's design. The printer features an intuitive control panel that simplifies operation, enabling quick setup and maintenance. This means that staff can spend less time troubleshooting and more time focusing on customer service.

In terms of print resolution, the TLP-B2 offers a satisfying output quality, capable of producing sharp and clear text as well as detailed graphics. This ensures that printed receipts and labels not only convey information effectively but also maintain a professional appearance.

Overall, the Toshiba TLP-B2 stands out as a reliable and efficient thermal printer that caters to diverse business needs. Its combination of fast print speeds, multiple connectivity options, durability, and user-friendly design makes it an excellent choice for businesses looking to enhance their printing capabilities while optimizing costs.
Top Page Image Contents