Toshiba TLP-B2 owner manual Trouble indications, Maintenance, Lamp turns off or does not light up

Trouble indications	ON	LAMP	TEMP	CONTENTS	54
If there is some problem inside the				The power does not come on.
projector, the indicators light up or flash.
				→ Malfunction of the unit.
	(OFF)ON	LAMPor	TEMP	• Unplug the power cord and call the dealer.

Lit
(red)ON	LAMP	TEMP
			The lamp turns off or does not light up.
			→ The lamp’s end, or malfunction of the unit.
Lit	Lit		• Lamp’s life length is over, replace the lamp with new one.
(red)ON	LAMP(red)	TEMP	• Unplug the power cord and call the dealer.
TEMP indicator
			The power turns off or does not come on.
LAMP indicator
			→ The inside is too hot, or the projector has been working in
ON indicator
		Lit	an area of high temperature.
Lit
(red)		(red)	• Place the projector correctly so the intake and exhaust
ON	LAMP	TEMP		fans’ holes are not covered.
			•	Turn the projector off, and leave it for a while, and turn it
				on again.
			•	Clean the air filter.
			The power turns off or does not come on.
			→ Trouble with the intake fan.
Lit		Flashing	• Unplug the power cord and call the dealer.
(red)ON	LAMP	TEMP(red)
			The power turns off or does not come on.
			→ Trouble with the exhaust fan.
Lit		Flashing	• Unplug the power cord and call the dealer.
(red)		(orange)

Note

Before attempting any maintenance, unplug the power cord.

Maintenance