Toshiba TLP-B2 owner manual Before calling service personal, Others

Page 59

Before calling service personal

CONTENTS

Check the following points before asking for support service. Refer also to “Trouble indications”. 54

 

Symptom

Cause

Correction

Page

The power does not come on.

• The power cord is disconnected.

Firmly plug in the power cord.

18

 

• The lamp cover is not attached correctly.

Attach the cover correctly.

57

The power turns off while

• The ambient temperature of the projection room is too high.

Lower the ambient temperature of the projection room,

_

using the projector.

 

and turn the power on.

 

No image appears.

• The lens cover is on.

Take off the lens cover.

18

 

• The wrong input is selected.

Select the input source correctly.

26

 

• The muting mode is on.

Press MUTE to restore the picture.

30

 

• The “Brightness” adjustment is at its darkest.

Make the “Brightness” adjustment.

34

 

• The source is not correctly connected to the projector.

Connect the source correctly to the projector.

21

No sounds are heard.

• The wrong input is selected.

Select the input source correctly.

26

 

• The muting mode is on.

Press MUTE to restore the sound.

30

 

• The sound volume is at the minimum.

Adjust the sound volume.

42

 

• The source is not correctly connected to the projector.

Connect the source correctly to the projector.

21

The images are blurred.

• The lens is dirty.

Clean the lens. Use a lens cleaner to clean the lens.

56

Focusing is uneven.

• The picture is out of focus.

Focus the picture.

27

 

• The projection distance is not appropriate.

Adjust the distance properly.

17

 

• The projecting light is not hitting the screen squarely.

Adjust the projecting direction so that the light hits the

17

 

 

screen squarely.

 

 

• The “Brightness”, “Contrast”, “Sharpness” or “Phase” adjustmentsMake the “Picture” or “Image” adjustments.

36

 

are not correct.

 

38

The pictures are dim.

• The “Brightness” or “Contrast” adjustments are not correct.

Make the “Picture” adjustments.

34

 

• The lamp life is ending.

Replace the lamp.

57

The colors are faint.

• The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustmentsMake the “Picture” or “Level” adjustments.

36

The colors are strange.

are not correct.

 

40

 

• The lamp life is ending.

Replace the lamp.

57

The remote control does not

• The remote control is not facing the remote sensor.

Face the remote control transmitter toward the remote

15

work.

 

sensor on the projector.

 

 

• The remote control is too far.

Operate within about 5 meters.

15

 

• There is an obstruction between the remote control and the

Remove the obstacle.

_

 

remote sensor.

 

 

 

• The batteries are exhausted.

Replace the batteries.

14

 

 

 

 

59

Others

Image 59
Contents TLP-B2ultra U Before use Safety PrecautionsImportant Precautions Important Safety Instructions Heat Important Safety InstructionsObject and Liquid Entry UseCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Names of each part on the main unit Foot adjusterSpeaker Exhaust holes AC in socket Control connector RS-232CCT -90038ZOOM Push back the holder Loading a batteryFront side Rear side Remote control operationTranslucent screen Viewer Floor-mounted projector placementSide view Determine the screen size projected on the screenTop view Push both sides of the lens cover to take off Connect the power cordTake off the lens cover Turn counterclockwise to lower Projector placement angle adjustmentHeight Turn clockwise to lift upTranslucent screen Ceiling-mounted projector placementCeiling-mounted front projection Ceiling-mounted rear projectionCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO CONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computerCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting video equipmentCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Projector operation control by a computerOperations Playback modeProjection on the screen Press ON/STANDBYSelect the input source On the remote control, press RGB or VideoProjection on the screen Turn to the right to enlarge the picture Focusing ringZooming ring Focus on the picture by turningPress ON/STANDBY again Turning the power offOff, unplug the power cord ProjectorKEY Press Keystone Correcting the keystone distortionPress Mute Cutting off the picture and sound temporarilyPress Freeze Freezing the picturePress Zoom + Enlarging the picture sizeUsed frequently AdjustmentsMenu screen structure Quick menuPress Enter Quick menu settingAdjust the item by pressing Press MenuScreen changes to the full menu screen Quick menu settingMenu screen disappears Display the full menu screen Adjusting picture Picture adjustmentSelect the setting item Contrast Pressing AdjustmentsIf you adjust other setting item, return to step Adjusting pictureAdjusting Image Image adjustment Clock To remove vertical stripes Adjusting imageMenu button will return to the previous setting screen Position To shift the image down -, to up +Level by pressing Adjusting RGB-level Level adjustmentEnter Adjusting RGB-levelSelect, Output select by pressing Adjusting audio output Audio adjustmentChannel select Adjusting audio outputAdjust the Volume by pressing Press Menu several times until the fullSetting screen for the item selected appears Setting the input signal Signal settingMode, No signal background, No signal Power off by pressing Then pressNo signal power off Picture modeVideo mode No signal backgroundSetting the input signal Screen display by pressing / and then Setting the display method Display settingSelect by pressing / and then press Enter Position, Menu background color, OnMenu background color Setting the display methodChange the selection by pressing Menu positionDefault setting Language Default settingProjection mode Power onMenu Display the current operation status Reset, Status display Data settingStatus display Keystone reset Reset, Status displayFactory reset mode Lamp turns off or does not light up MaintenanceOn indicator Trouble indicationsAttach the air filter cover Maintenance Air filter cleaningUnplug the power cord Take off the air filter cover Clean the air filter coverReplacing the intake, exhaust fans and air filter Lens and main unit cleaningCleaning the lens Cleaning the main unitPull out the lamp Lamp replacementUnplug the power cord Wait until the lamp gets cold enough Take off the lamp cover on the bottom panelAttach the lamp cover Maintenance Reset the lamp timerLoad a new lamp Others Before calling service personalPin arrangements Signal assignment for RGB inputTiming chart Applicable RGB signalInterface format Command list Controlling the projector by using RS-232CControlling the projector by using RS-232C Main unit SpecificationsAccessories Toshiba TLP-B2 Series 3LCD Data Projector Limited WarrantyLimited Warranty

TLP-B2 specifications

The Toshiba TLP-B2 is a notable addition to the family of compact and robust thermal printers, designed to meet a variety of business needs. Ideal for retail, hospitality, and healthcare industries, the TLP-B2 combines reliability with efficiency, making it a preferred choice for those seeking versatility in printing.

One of the main features of the TLP-B2 is its impressive print speed. With a maximum print speed of up to 300 mm per second, the printer caters to high-demand environments where fast service is essential. Whether printing receipts or labels, the TLP-B2 ensures minimal delays, which can significantly enhance customer experience.

The Toshiba TLP-B2 leverages advanced thermal printing technology, which means it requires no ink or toner. This not only reduces operational costs but also makes the printer more environmentally friendly. The thermal transfer and direct thermal printing options provide flexible usage, allowing users to choose the method that best fits their requirements.

Connectivity is another key characteristic of the TLP-B2. Equipped with multiple interface options, including USB, Ethernet, and serial interfaces, it seamlessly integrates into existing systems. This versatility ensures that the TLP-B2 can be easily adopted in various settings, whether in standalone applications or part of a larger network.

Durability is a hallmark of the TLP-B2, built to withstand the rigors of everyday use. Its robust design and high-quality components ensure long-lasting performance, while its compact size allows it to fit easily in limited spaces. This balance of durability and size is particularly advantageous for businesses where space is at a premium.

User-friendliness is also emphasized in the TLP-B2's design. The printer features an intuitive control panel that simplifies operation, enabling quick setup and maintenance. This means that staff can spend less time troubleshooting and more time focusing on customer service.

In terms of print resolution, the TLP-B2 offers a satisfying output quality, capable of producing sharp and clear text as well as detailed graphics. This ensures that printed receipts and labels not only convey information effectively but also maintain a professional appearance.

Overall, the Toshiba TLP-B2 stands out as a reliable and efficient thermal printer that caters to diverse business needs. Its combination of fast print speeds, multiple connectivity options, durability, and user-friendly design makes it an excellent choice for businesses looking to enhance their printing capabilities while optimizing costs.