Toshiba TLP-B2 Lamp replacement, Unplug the power cord Wait until the lamp gets cold enough

Page 57

Lamp replacement

CONTENTS

57

The lamp will eventually begin to project dark or dull pictures and finally will not light up. (Lamp’s life length depends on the use condition.) In such a case, replace the lamp with new one.

CAUTION

1 Unplug the power cord.

2 Wait until the lamp gets cold enough.

•If you use the projector mounted on the ceiling, ask the dealer to carry out the maintenance such as cleaning or replacement of the lamp.

•When replacing, always use lamp “TLPLB2P” (sold separately). For detail, refer to the lamp instruction.

•If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service.

3

4

1

2

1

2

Take off the lamp cover on the bottom panel.

Loosen two screws, and pull off the lamp cover.

Pull out the lamp.

Loosen the two fixing screws, and lift up the handle to pull out the lamp.

Maintenance

Continued

Page 56 Page 58
Image 57
Page 56 Page 58
Contents TLP-B2ultra U Before use Safety PrecautionsImportant Precautions Important Safety Instructions Heat Important Safety InstructionsObject and Liquid Entry UseCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Names of each part on the main unit Foot adjusterSpeaker Exhaust holes AC in socket Control connector RS-232CCT -90038ZOOM Push back the holder Loading a batteryFront side Rear side Remote control operationTranslucent screen Viewer Floor-mounted projector placementDetermine the screen size projected on the screen Top viewSide view Connect the power cord Take off the lens coverPush both sides of the lens cover to take off Height Projector placement angle adjustmentTurn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted front projection Ceiling-mounted projector placementCeiling-mounted rear projection Translucent screenCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO CONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computerCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting video equipmentCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Projector operation control by a computerProjection on the screen Playback modePress ON/STANDBY OperationsOn the remote control, press RGB or Video Projection on the screenSelect the input source Zooming ring Focusing ringFocus on the picture by turning Turn to the right to enlarge the pictureOff, unplug the power cord Turning the power offProjector Press ON/STANDBY againKEY Press Keystone Correcting the keystone distortionPress Mute Cutting off the picture and sound temporarilyPress Freeze Freezing the picturePress Zoom + Enlarging the picture sizeMenu screen structure AdjustmentsQuick menu Used frequentlyAdjust the item by pressing Quick menu settingPress Menu Press EnterQuick menu setting Menu screen disappearsScreen changes to the full menu screen Select the setting item Contrast Adjusting picture Picture adjustmentPressing Adjustments Display the full menu screenIf you adjust other setting item, return to step Adjusting pictureAdjusting Image Image adjustment Menu button will return to the previous setting screen Adjusting imagePosition To shift the image down -, to up + Clock To remove vertical stripesLevel by pressing Adjusting RGB-level Level adjustmentEnter Adjusting RGB-levelSelect, Output select by pressing Adjusting audio output Audio adjustmentAdjust the Volume by pressing Adjusting audio outputPress Menu several times until the full Channel selectMode, No signal background, No signal Setting the input signal Signal settingPower off by pressing Then press Setting screen for the item selected appearsVideo mode Picture modeNo signal background No signal power offSetting the input signal Select by pressing / and then press Enter Setting the display method Display settingPosition, Menu background color, On Screen display by pressing / and thenChange the selection by pressing Setting the display methodMenu position Menu background colorDefault setting Projection mode Default settingPower on LanguageMenu Reset, Status display Data setting Status displayDisplay the current operation status Reset, Status display Factory reset modeKeystone reset On indicator MaintenanceTrouble indications Lamp turns off or does not light upUnplug the power cord Take off the air filter cover Air filter cleaningClean the air filter cover Attach the air filter cover MaintenanceCleaning the lens Lens and main unit cleaningCleaning the main unit Replacing the intake, exhaust fans and air filterUnplug the power cord Wait until the lamp gets cold enough Lamp replacementTake off the lamp cover on the bottom panel Pull out the lampMaintenance Reset the lamp timer Load a new lampAttach the lamp cover Others Before calling service personalPin arrangements Signal assignment for RGB inputTiming chart Applicable RGB signalInterface format Command list Controlling the projector by using RS-232CControlling the projector by using RS-232C Main unit SpecificationsAccessories Toshiba TLP-B2 Series 3LCD Data Projector Limited WarrantyLimited Warranty

TLP-B2 specifications

The Toshiba TLP-B2 is a notable addition to the family of compact and robust thermal printers, designed to meet a variety of business needs. Ideal for retail, hospitality, and healthcare industries, the TLP-B2 combines reliability with efficiency, making it a preferred choice for those seeking versatility in printing.

One of the main features of the TLP-B2 is its impressive print speed. With a maximum print speed of up to 300 mm per second, the printer caters to high-demand environments where fast service is essential. Whether printing receipts or labels, the TLP-B2 ensures minimal delays, which can significantly enhance customer experience.

The Toshiba TLP-B2 leverages advanced thermal printing technology, which means it requires no ink or toner. This not only reduces operational costs but also makes the printer more environmentally friendly. The thermal transfer and direct thermal printing options provide flexible usage, allowing users to choose the method that best fits their requirements.

Connectivity is another key characteristic of the TLP-B2. Equipped with multiple interface options, including USB, Ethernet, and serial interfaces, it seamlessly integrates into existing systems. This versatility ensures that the TLP-B2 can be easily adopted in various settings, whether in standalone applications or part of a larger network.

Durability is a hallmark of the TLP-B2, built to withstand the rigors of everyday use. Its robust design and high-quality components ensure long-lasting performance, while its compact size allows it to fit easily in limited spaces. This balance of durability and size is particularly advantageous for businesses where space is at a premium.

User-friendliness is also emphasized in the TLP-B2's design. The printer features an intuitive control panel that simplifies operation, enabling quick setup and maintenance. This means that staff can spend less time troubleshooting and more time focusing on customer service.

In terms of print resolution, the TLP-B2 offers a satisfying output quality, capable of producing sharp and clear text as well as detailed graphics. This ensures that printed receipts and labels not only convey information effectively but also maintain a professional appearance.

Overall, the Toshiba TLP-B2 stands out as a reliable and efficient thermal printer that caters to diverse business needs. Its combination of fast print speeds, multiple connectivity options, durability, and user-friendly design makes it an excellent choice for businesses looking to enhance their printing capabilities while optimizing costs.
Top Page Image Contents