Toshiba TLP-B2 owner manual Turning the power off, Projector, Press ON/STANDBY again

Page 28

Turning the power off

CONTENTS

28

Indicators

1

Press ON/STANDBY after using the

projector.

An instruction message appears.

2

Press ON/STANDBY again.

 

 

 

 

 

 

The LAMP indicator turns off, and the projector turns to

 

standby mode. (The ON indicator lights in orange.)

 

ON LAMP

ON LAMP

ON

LAMP

 

(Orange) Flashing

(Orange) Flashing

(Orange)

(Off)

 

(Green)

(Orange)

 

 

3

After confirming the LAMP indicator turns

off, unplug the power cord.

 

 

The ON indicator turns off.

Notes

•Immediately after the power off, the projector may not be turned on while the LAMP indicator is flashing in green.

•Even after turning the power off, the intake and exhaust fans continue to work for a while to cool the inside of the projector. (When the lamp indicator is flashing in orange.)

•Before unplugging the power cord, make sure that the LAMP indicator is turned off.

Operations

Page 27 Page 29
Image 28
Page 27 Page 29
Contents TLP-B2ultra U Safety Precautions Before useImportant Precautions Important Safety Instructions Important Safety Instructions HeatUse Object and Liquid EntryCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Foot adjuster Names of each part on the main unitControl connector RS-232C Speaker Exhaust holes AC in socketCT -90038ZOOM Loading a battery Push back the holderRemote control operation Front side Rear sideFloor-mounted projector placement Translucent screen ViewerTop view Determine the screen size projected on the screenSide view Take off the lens cover Connect the power cordPush both sides of the lens cover to take off Projector placement angle adjustment HeightTurn clockwise to lift up Turn counterclockwise to lowerCeiling-mounted projector placement Ceiling-mounted front projectionCeiling-mounted rear projection Translucent screenCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOConnecting video equipment CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOProjector operation control by a computer CONTROLRS-232CRGB S-VIDEOAUDIOVIDEOPlayback mode Projection on the screenPress ON/STANDBY OperationsProjection on the screen On the remote control, press RGB or VideoSelect the input source Focusing ring Zooming ringFocus on the picture by turning Turn to the right to enlarge the pictureTurning the power off Off, unplug the power cordProjector Press ON/STANDBY againCorrecting the keystone distortion KEY Press KeystoneCutting off the picture and sound temporarily Press MuteFreezing the picture Press FreezeEnlarging the picture size Press Zoom +Adjustments Menu screen structureQuick menu Used frequentlyQuick menu setting Adjust the item by pressingPress Menu Press EnterMenu screen disappears Quick menu settingScreen changes to the full menu screen Adjusting picture Picture adjustment Select the setting item ContrastPressing Adjustments Display the full menu screenAdjusting picture If you adjust other setting item, return to stepAdjusting Image Image adjustment Adjusting image Menu button will return to the previous setting screenPosition To shift the image down -, to up + Clock To remove vertical stripesAdjusting RGB-level Level adjustment Level by pressingAdjusting RGB-level EnterAdjusting audio output Audio adjustment Select, Output select by pressingAdjusting audio output Adjust the Volume by pressingPress Menu several times until the full Channel selectSetting the input signal Signal setting Mode, No signal background, No signalPower off by pressing Then press Setting screen for the item selected appearsPicture mode Video modeNo signal background No signal power offSetting the input signal Setting the display method Display setting Select by pressing / and then press EnterPosition, Menu background color, On Screen display by pressing / and thenSetting the display method Change the selection by pressingMenu position Menu background colorDefault setting Default setting Projection modePower on LanguageMenu Status display Reset, Status display Data settingDisplay the current operation status Factory reset mode Reset, Status displayKeystone reset Maintenance On indicatorTrouble indications Lamp turns off or does not light upAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter cover Attach the air filter cover MaintenanceLens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Unplug the power cord Wait until the lamp gets cold enoughTake off the lamp cover on the bottom panel Pull out the lampLoad a new lamp Maintenance Reset the lamp timerAttach the lamp cover Before calling service personal OthersSignal assignment for RGB input Pin arrangementsApplicable RGB signal Timing chartControlling the projector by using RS-232C Interface format Command listControlling the projector by using RS-232C Specifications Main unitAccessories Limited Warranty Toshiba TLP-B2 Series 3LCD Data ProjectorLimited Warranty

TLP-B2 specifications

The Toshiba TLP-B2 is a notable addition to the family of compact and robust thermal printers, designed to meet a variety of business needs. Ideal for retail, hospitality, and healthcare industries, the TLP-B2 combines reliability with efficiency, making it a preferred choice for those seeking versatility in printing.

One of the main features of the TLP-B2 is its impressive print speed. With a maximum print speed of up to 300 mm per second, the printer caters to high-demand environments where fast service is essential. Whether printing receipts or labels, the TLP-B2 ensures minimal delays, which can significantly enhance customer experience.

The Toshiba TLP-B2 leverages advanced thermal printing technology, which means it requires no ink or toner. This not only reduces operational costs but also makes the printer more environmentally friendly. The thermal transfer and direct thermal printing options provide flexible usage, allowing users to choose the method that best fits their requirements.

Connectivity is another key characteristic of the TLP-B2. Equipped with multiple interface options, including USB, Ethernet, and serial interfaces, it seamlessly integrates into existing systems. This versatility ensures that the TLP-B2 can be easily adopted in various settings, whether in standalone applications or part of a larger network.

Durability is a hallmark of the TLP-B2, built to withstand the rigors of everyday use. Its robust design and high-quality components ensure long-lasting performance, while its compact size allows it to fit easily in limited spaces. This balance of durability and size is particularly advantageous for businesses where space is at a premium.

User-friendliness is also emphasized in the TLP-B2's design. The printer features an intuitive control panel that simplifies operation, enabling quick setup and maintenance. This means that staff can spend less time troubleshooting and more time focusing on customer service.

In terms of print resolution, the TLP-B2 offers a satisfying output quality, capable of producing sharp and clear text as well as detailed graphics. This ensures that printed receipts and labels not only convey information effectively but also maintain a professional appearance.

Overall, the Toshiba TLP-B2 stands out as a reliable and efficient thermal printer that caters to diverse business needs. Its combination of fast print speeds, multiple connectivity options, durability, and user-friendly design makes it an excellent choice for businesses looking to enhance their printing capabilities while optimizing costs.
Top Page Image Contents