Toshiba TLP-B2 owner manual Important Precautions

Page 3

IMPORTANT PRECAUTIONS

CONTENTS

3

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish.

In the spaces provided below, record the Model and Serial No. located at the rear of your LCD projector.

Model No.

 

Serial No.

 

Retain this information for future reference.

Before use

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.

DECLARATION OF CONFORMITY

TRADE NAME: LCD PROJECTOR

MODEL NAME: TLP-B2U

RESPONSIBLE PARTY: TOSHIBA AMERICA CONSUMER PRODUCTS, INC.

82 Totowa Rd., Wayne, NJ 07470 U.S.A

Phone: (973) 628-8000

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents TLP-B2ultra U Before use Safety PrecautionsImportant Precautions Important Safety Instructions Heat Important Safety InstructionsObject and Liquid Entry UseCoin-shaped Battery Damage Requiring Service Power supply cord selection Contents Names of each part on the main unit Foot adjusterSpeaker Exhaust holes AC in socket Control connector RS-232CCT -90038ZOOM Push back the holder Loading a batteryFront side Rear side Remote control operationTranslucent screen Viewer Floor-mounted projector placementDetermine the screen size projected on the screen Top viewSide view Connect the power cord Take off the lens coverPush both sides of the lens cover to take off Turn counterclockwise to lower Projector placement angle adjustmentHeight Turn clockwise to lift upTranslucent screen Ceiling-mounted projector placementCeiling-mounted front projection Ceiling-mounted rear projectionCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO CONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting a Macintosh computerCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Connecting video equipmentCONTROLRS-232CRGB S-VIDEOAUDIOVIDEO Projector operation control by a computerOperations Playback modeProjection on the screen Press ON/STANDBYOn the remote control, press RGB or Video Projection on the screenSelect the input source Turn to the right to enlarge the picture Focusing ringZooming ring Focus on the picture by turningPress ON/STANDBY again Turning the power offOff, unplug the power cord ProjectorKEY Press Keystone Correcting the keystone distortionPress Mute Cutting off the picture and sound temporarilyPress Freeze Freezing the picturePress Zoom + Enlarging the picture sizeUsed frequently AdjustmentsMenu screen structure Quick menuPress Enter Quick menu settingAdjust the item by pressing Press MenuQuick menu setting Menu screen disappearsScreen changes to the full menu screen Display the full menu screen Adjusting picture Picture adjustmentSelect the setting item Contrast Pressing AdjustmentsIf you adjust other setting item, return to step Adjusting pictureAdjusting Image Image adjustment Clock To remove vertical stripes Adjusting imageMenu button will return to the previous setting screen Position To shift the image down -, to up +Level by pressing Adjusting RGB-level Level adjustmentEnter Adjusting RGB-levelSelect, Output select by pressing Adjusting audio output Audio adjustmentChannel select Adjusting audio outputAdjust the Volume by pressing Press Menu several times until the fullSetting screen for the item selected appears Setting the input signal Signal settingMode, No signal background, No signal Power off by pressing Then pressNo signal power off Picture modeVideo mode No signal backgroundSetting the input signal Screen display by pressing / and then Setting the display method Display settingSelect by pressing / and then press Enter Position, Menu background color, OnMenu background color Setting the display methodChange the selection by pressing Menu positionDefault setting Language Default settingProjection mode Power onMenu Reset, Status display Data setting Status displayDisplay the current operation status Reset, Status display Factory reset modeKeystone reset Lamp turns off or does not light up MaintenanceOn indicator Trouble indicationsAttach the air filter cover Maintenance Air filter cleaningUnplug the power cord Take off the air filter cover Clean the air filter coverReplacing the intake, exhaust fans and air filter Lens and main unit cleaningCleaning the lens Cleaning the main unitPull out the lamp Lamp replacementUnplug the power cord Wait until the lamp gets cold enough Take off the lamp cover on the bottom panelMaintenance Reset the lamp timer Load a new lampAttach the lamp cover Others Before calling service personalPin arrangements Signal assignment for RGB inputTiming chart Applicable RGB signalInterface format Command list Controlling the projector by using RS-232CControlling the projector by using RS-232C Main unit SpecificationsAccessories Toshiba TLP-B2 Series 3LCD Data Projector Limited WarrantyLimited Warranty

TLP-B2 specifications

The Toshiba TLP-B2 is a notable addition to the family of compact and robust thermal printers, designed to meet a variety of business needs. Ideal for retail, hospitality, and healthcare industries, the TLP-B2 combines reliability with efficiency, making it a preferred choice for those seeking versatility in printing.

One of the main features of the TLP-B2 is its impressive print speed. With a maximum print speed of up to 300 mm per second, the printer caters to high-demand environments where fast service is essential. Whether printing receipts or labels, the TLP-B2 ensures minimal delays, which can significantly enhance customer experience.

The Toshiba TLP-B2 leverages advanced thermal printing technology, which means it requires no ink or toner. This not only reduces operational costs but also makes the printer more environmentally friendly. The thermal transfer and direct thermal printing options provide flexible usage, allowing users to choose the method that best fits their requirements.

Connectivity is another key characteristic of the TLP-B2. Equipped with multiple interface options, including USB, Ethernet, and serial interfaces, it seamlessly integrates into existing systems. This versatility ensures that the TLP-B2 can be easily adopted in various settings, whether in standalone applications or part of a larger network.

Durability is a hallmark of the TLP-B2, built to withstand the rigors of everyday use. Its robust design and high-quality components ensure long-lasting performance, while its compact size allows it to fit easily in limited spaces. This balance of durability and size is particularly advantageous for businesses where space is at a premium.

User-friendliness is also emphasized in the TLP-B2's design. The printer features an intuitive control panel that simplifies operation, enabling quick setup and maintenance. This means that staff can spend less time troubleshooting and more time focusing on customer service.

In terms of print resolution, the TLP-B2 offers a satisfying output quality, capable of producing sharp and clear text as well as detailed graphics. This ensures that printed receipts and labels not only convey information effectively but also maintain a professional appearance.

Overall, the Toshiba TLP-B2 stands out as a reliable and efficient thermal printer that caters to diverse business needs. Its combination of fast print speeds, multiple connectivity options, durability, and user-friendly design makes it an excellent choice for businesses looking to enhance their printing capabilities while optimizing costs.
Top Page Image Contents