Operations
Turning the power on and off (Continued)
Turning the power on
Press the ON/STANDBY button.
Remote control Control panel The power is turned on, and three (ON, LAMP, and FAN) indicators come on in 
green. After a moment, the startup screen
appears.
ON LAMP TEMP FAN
(Green) | (Green) | (Green) |
Lit | Lit | Lit |
• Do not look into the lens during operation. Doing so could damage your vision.
•Families with children should be particularly careful.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
•Do not place your hands, face, or other objects near the air exhaust. Doing
so could cause burns or deform, discolor, or break the object.
Notes
•The startup screen will disappear after a moment. You can dismiss the startup
screen before this by performing any operation.
•After the startup screen disappears, the language menu is displayed when you
use the projector for the first time after purchase. (See 
p.20.)
•Turning the power on starts the cooling fan running with operating sound.
Safety lock
You can prevent the projector’s power from being turned on accidentally.
Set the safety lock switch on the bottom of the main unit to ON.
In standby mode with the safety lock switch set to ON, the ON indicator lights in orange and in green alternately.
Once you have set the safety lock switch to ON, you have to hold down the ON/ STANDBY button for at least two seconds to turn on the power of the projector. Other operations are the same.
18