Toshiba TLP-ET1U, TLP-ET1B Reset the lamp timer, Used lamps, Maintenance Lamp replacement

Page 44

Maintenance

Lamp replacement (Continued)

Reset the lamp timer.

qTurn on the power of this unit.

The startup screen appears, followed by the replacement message screen.

wPress the MENU button.

The menu screen appears.

eSelect “Lamp time reset” in the “Default setting” menu and press the OK button.

rSelect “Yes” on the dialog screen, then press the OK button.

The lamp time is reset.

PRECAUTIONS

•Take Step 9 above within seven minutes after turning on the power.

•Be sure to reset the lamp time after replacing the lamp.

•The lamp may burst if you continue to use it without replacing while resetting the lamp time.

•Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the lamp will not come on

(see p.45).

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

●Used lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose it in accordance with local regulations.

44

Image 44

Contents English Before Using USA onlyPower Sources Source of LightVentilation HeatCleaning Object and Liquid Entry Power-Cord ProtectionOverloading Lightning stormsAccessories Damage Requiring ServiceReplacement Parts Safety CheckLabel Locations Place and Manner of Installation Save Original Packing MaterialsMoisture Condensation Avoid Volatile LiquidChecking the package contents Contents Parts of the main unit BottomEnglish Control panel Connection terminals Remove the battery cover Put back the battery coverOperating the remote control Insert dry cell batteriesDetermine the projection distance and place the unit Determine the placement stylePlacing the projector Connecting a video device Before connectionConnecting a DVD player with component video terminals Connecting a computerTurning the power on and off Connect the power cordBefore turning the power on Remove the lens coverTurning the power on Safety lockOperations Turning the power on and off Press the ON/STANDBY buttonTurning the power off Press the ON/STANDBY button againTurn on the power Adjust the projection angleAdjust the screen focus Select the language when using the unit for the first timeAdjust the volume with the and buttons Place the connected device in operating statusSelect the connected input Press an Input button VIDEO/S, YP BP RPress the Easy button Easy setup using the Easy buttonUse the and buttons to set or adjust the selected item Correction of keystone distortion Press Button Changing the projection sizePress the button Changing the screen size Press the Size button on the remote controlInput signal Projection screen Press the Freeze button on the remote control Press the Mute button on the remote controlPress the Sleep button on the remote control Switching the picture and sound Press the Surround button on the remote controlSetting the picture mode Switching to surround soundUse the , , , and buttons to move the enlarged area Press the D.ZOOM button on the remote controlEnlarging the picture Zoom Calling up a user profile Press the User buttonPress the Menu button Using the menusHow to use the menus Use the and buttons to adjust the selected item When a setting item is selectedWhen an adjustment item is selected When an execution item is selectedDescription Video Picture adjustment menuOperations Using the menus Description Video S-video Y/P B/P R Audio adjustment menu Default setting menu Default settingStatus display menu Use Buttons to selectStatus display menu icon User memory menu User memory name input screen will appear Maintenance Removing the tilt standAir filter cleaning Lens and main unit cleaning Lens cleaningMain unit cleaning Replacing air intake and exhaust fans, and air filterRemove the tilt stand Lamp replacementLamp replacement messages Remove the lamp cover Pull out the lamp Mount the new lampReplace the lamp cover Replace the tilt standUsed lamps Reset the lamp timerMaintenance Lamp replacement No power Power went out during use, or won’t come onPower went out during use Trouble indicationsBefore calling service personnel Specification SpecificationsList of general specifications Others Specifications List of supported signalsList of supported signals RGB signals List of supported signals Y/PB/PR signals List of supported signals Video and S-Video signalsMini D-sub 15-pin connector Pin assignment of Computer terminal