Toshiba TLP-ET1E, TLP-ET1B Changing the screen size, Press the Size button on the remote control

Page 25

Operations

Changing the screen size

The projection screen of this projector is 16:9, though the screen size can be changed depending on the input signal.

English

Notes

The screen size cannot be changed when the 16:9 signal is input.

You cannot select “Theater wide” and “Zoom” when the input is

COMPUTER.

An adjustment bar of “Up/ down shift” is displayed in “Zoom” mode and you can

make the adjustment (See

p. 23, 35.)

If you use this function on commercial video soft- ware or on a broadcast or cable broadcast except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws.

Press the SIZE button on the remote control.

Pressing the SIZE button for the first time displays the current screen size. Pressing the SIZE button while the current screen size is displayed cycles the screen size through the following options:

Full Theater wide 4:3 Zoom

Full

: This mode is best for squeeze-signal video images.

Theater wide : This mode is best for 4:3-signal video images on the wide screen.

4:3

: This mode is best for 4:3-signal video images on the 4:3-

 

size screen.

 

 

 

Zoom

: This mode is best for video images of letter-box or cinema signals.

Input signal

 

 

Projection screen

 

4:3 signal

Full

 

Theater wide (O)

 

 

 

 

 

Zoom

4:3 signal

 

 

 

 

 

 

 

Squeeze signal

Full (O)

 

Theater wide

 

 

 

 

 

Zoom

4:3 signal

 

 

 

 

 

 

 

Letter box signal

Full

 

Theater wide

 

 

 

 

 

Zoom (O)

4:3

 

 

 

 

 

 

 

Cinema signal

Full

 

Theater wide

 

 

 

 

 

Zoom (O)

4:3

 

 

 

 

 

 

 

 

 

 

(O): Optimum screen size

Maintenance Operations Preparations Before Using

Others

25

Image 25
Contents English USA only Before UsingSource of Light Power SourcesVentilation HeatPower-Cord Protection Cleaning Object and Liquid EntryOverloading Lightning stormsDamage Requiring Service AccessoriesReplacement Parts Safety CheckLabel Locations Save Original Packing Materials Place and Manner of InstallationMoisture Condensation Avoid Volatile LiquidChecking the package contents Contents Bottom Parts of the main unitEnglish Control panel Connection terminals Put back the battery cover Remove the battery coverOperating the remote control Insert dry cell batteriesPlacing the projector Determine the placement styleDetermine the projection distance and place the unit Before connection Connecting a video deviceConnecting a computer Connecting a DVD player with component video terminalsConnect the power cord Turning the power on and offBefore turning the power on Remove the lens coverSafety lock Turning the power onOperations Turning the power on and off Press the ON/STANDBY buttonPress the ON/STANDBY button again Turning the power offAdjust the projection angle Turn on the powerAdjust the screen focus Select the language when using the unit for the first timePlace the connected device in operating status Adjust the volume with the and buttonsSelect the connected input Press an Input button VIDEO/S, YP BP RUse the and buttons to set or adjust the selected item Easy setup using the Easy buttonPress the Easy button Correction of keystone distortion Press the button Changing the projection sizePress Button Input signal Projection screen Press the Size button on the remote controlChanging the screen size Press the Sleep button on the remote control Press the Mute button on the remote controlPress the Freeze button on the remote control Press the Surround button on the remote control Switching the picture and soundSetting the picture mode Switching to surround soundEnlarging the picture Zoom Press the D.ZOOM button on the remote controlUse the , , , and buttons to move the enlarged area Press the User button Calling up a user profileHow to use the menus Using the menusPress the Menu button When a setting item is selected Use the and buttons to adjust the selected itemWhen an adjustment item is selected When an execution item is selectedOperations Using the menus Picture adjustment menuDescription Video Description Video S-video Y/P B/P R Audio adjustment menu Default setting Default setting menuStatus display menu icon Use Buttons to selectStatus display menu User memory menu User memory name input screen will appear Removing the tilt stand MaintenanceAir filter cleaning Lens cleaning Lens and main unit cleaningMain unit cleaning Replacing air intake and exhaust fans, and air filterLamp replacement messages Lamp replacementRemove the tilt stand Pull out the lamp Mount the new lamp Remove the lamp coverReplace the lamp cover Replace the tilt standMaintenance Lamp replacement Reset the lamp timerUsed lamps Power went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals List of supported signalsOthers Specifications List of supported signals Video and S-Video signals List of supported signals Y/PB/PR signalsMini D-sub 15-pin connector Pin assignment of Computer terminal