Toshiba TLP-ET1B Place the connected device in operating status, Select the connected input

Page 21

YPBPR/AV

Place the connected device in operating status.

Turn on the connected device such as a video device.

Select the connected input.

 

 

(Using the remote control)

 

 

Press an INPUT button (VIDEO/S, YPBPR/

 

 

YPBPR/AV

AV, or COMPUTER) to select the input.

 

 

The picture from the selected input will be

 

 

projected.

English

• Pressing the VIDEO/S button switches the projected picture between the VIDEO and S-VIDEO inputs.

• Pressing the YPBPR/AV button switches the projected picture between the Y/PB/PR and AV inputs. (This function is available only for the TLP- ET1B and TLP-ET1E.)

(Using the control panel)

Press the INPUT button on the main unit to select the input.

Pressing the INPUT button switches the inputs as shown below.

Video → S-video→ Y/PB/PR → AV → Computer

• “AV” is available only for the TLP-ET1B and TLP-ET1E.

Adjust the volume with the () and () buttons.

Remote control Control panel The speaker volume can be adjusted when an audio signal is being input.

Notes

•Note that because of the lamp characteristics, the brightness of the lamp may fluctuate slightly.

•A lamp is a consumable supply. If the lamp is used for an extended period, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not a malfunction.

•Although this projector supports a wide range of RGB signals (see p.48), any resolution signals that exceed the number of pixels of the LCD panel of this projector will enlarge or compress the pictures, causing lack of some information or affecting image quality.

•With some models of computer having LCD displays or the like, displaying images simultaneously on the projector and the monitor’s display may cause the images to be shown improperly. If this happens, turn off the computer’s LCD display. For information on how to turn off the LCD display, see the owner’s manual of your computer.

•If a signal not supported by the projector is input, the icon will appear.

•If a no signal is being input from the connected device, the icon will appear. The screen color will also change to blue and the TOSHIBA logo will appear.

•If no signal is being input for more than 10 minutes, the power will be automatically turned off and the unit will be placed in the standby state.

•If an unavailable operation button is pressed, the icon will appear.

•The audio input to the Audio terminals is played regardless of the input source. (When the AV input is selected,

however, AV IN audio is played.)

21

 

Maintenance Operations Preparations Before Using

Others

Page 20 Page 22
Image 21
Page 20 Page 22
Contents English USA only Before UsingSource of Light Power SourcesVentilation HeatPower-Cord Protection Cleaning Object and Liquid EntryOverloading Lightning stormsDamage Requiring Service AccessoriesReplacement Parts Safety CheckLabel Locations Save Original Packing Materials Place and Manner of InstallationMoisture Condensation Avoid Volatile LiquidChecking the package contents Contents Bottom Parts of the main unitEnglish Control panel Connection terminals Put back the battery cover Remove the battery coverOperating the remote control Insert dry cell batteriesDetermine the placement style Placing the projectorDetermine the projection distance and place the unit Before connection Connecting a video deviceConnecting a computer Connecting a DVD player with component video terminalsConnect the power cord Turning the power on and offBefore turning the power on Remove the lens coverSafety lock Turning the power onOperations Turning the power on and off Press the ON/STANDBY buttonPress the ON/STANDBY button again Turning the power offAdjust the projection angle Turn on the powerAdjust the screen focus Select the language when using the unit for the first timePlace the connected device in operating status Adjust the volume with the and buttonsSelect the connected input Press an Input button VIDEO/S, YP BP REasy setup using the Easy button Use the and buttons to set or adjust the selected itemPress the Easy button Correction of keystone distortion Changing the projection size Press the buttonPress Button Press the Size button on the remote control Input signal Projection screenChanging the screen size Press the Mute button on the remote control Press the Sleep button on the remote controlPress the Freeze button on the remote control Press the Surround button on the remote control Switching the picture and soundSetting the picture mode Switching to surround soundPress the D.ZOOM button on the remote control Enlarging the picture ZoomUse the , , , and buttons to move the enlarged area Press the User button Calling up a user profileUsing the menus How to use the menusPress the Menu button When a setting item is selected Use the and buttons to adjust the selected itemWhen an adjustment item is selected When an execution item is selectedPicture adjustment menu Operations Using the menusDescription Video Description Video S-video Y/P B/P R Audio adjustment menu Default setting Default setting menuUse Buttons to select Status display menu iconStatus display menu User memory menu User memory name input screen will appear Removing the tilt stand MaintenanceAir filter cleaning Lens cleaning Lens and main unit cleaningMain unit cleaning Replacing air intake and exhaust fans, and air filterLamp replacement Lamp replacement messagesRemove the tilt stand Pull out the lamp Mount the new lamp Remove the lamp coverReplace the lamp cover Replace the tilt standReset the lamp timer Maintenance Lamp replacementUsed lamps Power went out during use, or won’t come on No powerPower went out during use Trouble indicationsBefore calling service personnel Specifications List of general specificationsSpecification List of supported signals List of supported signals RGB signalsOthers Specifications List of supported signals Video and S-Video signals List of supported signals Y/PB/PR signalsMini D-sub 15-pin connector Pin assignment of Computer terminal
Top Page Image Contents