Toshiba TLP-ET1U, TLP-ET1B, TLP-ET1E owner manual Default setting menu

Default setting menu

Use this menu to make settings such as the placement style (projection mode).

English

e.g.

Menu	Enter	Exit
Default setting
Keystone	0
Screen size	Zoom
Up/down shift	0
Lamp power	Low
Projection mode 1	Front
Projection mode 2	Standard
Language	English
NTSC mode	US
All reset
Lamp time reset

Press the MENU button.

Use the and buttons to select the default setting menu icon [], then press the button.

Use the and buttons to select an item you want to set, then set it according to the table shown below.

Remote control Control panel

Before Using

Item			Description
Keystone	Correct the keystone (trapezoid) distortion of the screen.
	Shrinking lower part			Shrinking upper part
Screen size	Set the screen size mode.
	1) Press the OK button.
	2) Select one from the displayed list with				and , then press the OK button.
		Full/Theater wide/4:3/Zoom
	(“Theater wide” and “Zoom” cannot be selected when the input is COMPUTER.)
	This item can also be set with the SIZE button on the remote control. (See					p.25.)
Up/down shift	Scroll the screen up or down, for example, when subtitles are outside the picture area.
	(Adjustable only when the screen size is “Zoom”.)
			Down		Up
Lamp power	Select lamp power with	and .
			Standard/Low
Projection mode 1	Select projection mode 1 with		and	, according to the projector’s placement style.
			Front/Rear
Projection mode 2	Select projection mode 2 with		and	, according to the projector’s placement style.
		Standard (floor-mounted)/Ceiling
Language	Select the language for on-screen menus and messages.

1)Press the OK button.

2)Select one from the displayed list with and , then press the OK button. English/Français/Deutsch/Italiano/Español/Português/

NTSC mode	Set with	and .
	US	: NTSC (US) mode
	JAPAN: NTSC (JAPAN) mode
All reset	Reset all of the adjustment and setting items to the defaults.

1)Press the OK button.

2)In the dialog box displayed, use or to select whether to execute this function, then press the OK button.

Lamp time reset Reset the lamp timer. (See p.44)

Note

•Pressing the EXIT button on the remote control dismisses the menu screen.

Maintenance Operations Preparations

Others

35