Toshiba TLP-ET1E, TLP-ET1B, TLP-ET1U Remove the lamp cover, Pull out the lamp Mount the new lamp

Page 43

Remove the lamp cover.

 

1

Loosen the screw, put your fingers on the hollow, then pull up to

2

 

 

the direction of the arrow as shown in the figure to remove the

 

 

 

 

lamp cover.

 

 

Hollow

English

Pull out the lamp.

1

2

Mount the new lamp.

2

1

Loosen the two lamp locking screws, and pull up the handle to remove the lamp.

Align the orientation, press down the new lamp until it reaches to the bottom, and lock it in place using the two lamp locking screws.

Operations Preparations Before Using

Replace the lamp cover.

2

Align the lamp cover, and press it in, then tighten the screws

loosened in Step 4 until the lamp cover is no longer loose.

1

Maintenance

Replace the tilt stand.

Put back the tilt stand using the reverse procedure to remove it.

Others

(Continued)

43

Image 43
Contents English USA only Before UsingHeat Power SourcesSource of Light VentilationLightning storms Cleaning Object and Liquid EntryPower-Cord Protection OverloadingSafety Check AccessoriesDamage Requiring Service Replacement PartsLabel Locations Avoid Volatile Liquid Place and Manner of InstallationSave Original Packing Materials Moisture CondensationChecking the package contents Contents Bottom Parts of the main unitEnglish Control panel Connection terminals Insert dry cell batteries Remove the battery coverPut back the battery cover Operating the remote controlPlacing the projector Determine the placement styleDetermine the projection distance and place the unit Before connection Connecting a video deviceConnecting a computer Connecting a DVD player with component video terminalsRemove the lens cover Turning the power on and offConnect the power cord Before turning the power onPress the ON/STANDBY button Turning the power onSafety lock Operations Turning the power on and offPress the ON/STANDBY button again Turning the power offSelect the language when using the unit for the first time Turn on the powerAdjust the projection angle Adjust the screen focusPress an Input button VIDEO/S, YP BP R Adjust the volume with the and buttonsPlace the connected device in operating status Select the connected inputUse the and buttons to set or adjust the selected item Easy setup using the Easy buttonPress the Easy button Correction of keystone distortion Press the button Changing the projection sizePress Button Input signal Projection screen Press the Size button on the remote controlChanging the screen size Press the Sleep button on the remote control Press the Mute button on the remote controlPress the Freeze button on the remote control Switching to surround sound Switching the picture and soundPress the Surround button on the remote control Setting the picture modeEnlarging the picture Zoom Press the D.ZOOM button on the remote controlUse the , , , and buttons to move the enlarged area Press the User button Calling up a user profileHow to use the menus Using the menusPress the Menu button When an execution item is selected Use the and buttons to adjust the selected itemWhen a setting item is selected When an adjustment item is selectedOperations Using the menus Picture adjustment menuDescription Video Description Video S-video Y/P B/P R Audio adjustment menu Default setting Default setting menuStatus display menu icon Use Buttons to selectStatus display menu User memory menu User memory name input screen will appear Removing the tilt stand MaintenanceAir filter cleaning Replacing air intake and exhaust fans, and air filter Lens and main unit cleaningLens cleaning Main unit cleaningLamp replacement messages Lamp replacementRemove the tilt stand Replace the tilt stand Remove the lamp coverPull out the lamp Mount the new lamp Replace the lamp coverMaintenance Lamp replacement Reset the lamp timerUsed lamps Trouble indications No powerPower went out during use, or won’t come on Power went out during useBefore calling service personnel List of general specifications SpecificationsSpecification List of supported signals RGB signals List of supported signalsOthers Specifications Pin assignment of Computer terminal List of supported signals Y/PB/PR signalsList of supported signals Video and S-Video signals Mini D-sub 15-pin connector