|
| 2002 Dimension One Spas Export Owner’s Manual |
| |
|
|
|
|
|
|
|
|
|
|
| Control |
| Function |
|
| 2 |
| 2. JETS Pad |
|
|
|
| Operates the jet pump associated with the Massage Sequencer. Status Light |
|
|
|
| illuminates when pump is on. |
|
|
|
|
|
|
| 3 |
| 3. SPEED Pad |
|
|
|
| The SPEED pad is used to change the time between each step in all sequences. |
|
|
|
| The default time is factory programmed for 5 second intervals. The first push of |
|
|
|
| the SPEED pad will change the step interval time to 15 seconds, the second push |
|
|
|
| will change the intervals to 30 seconds and the third push will reset the speed to |
|
|
|
| 5 second intervals. The LED indicator below the SPEED pad will blink at the speed |
|
|
|
| at which the system is operating. During a Pause condition the Speed LED |
|
|
|
| indicator will be OFF |
|
|
|
|
|
|
| 4 |
| 4.BEGIN/PAUSE Pad |
|
|
|
| The BEGIN/PAUSE pad is used to interrupt the massage sequence and to start a |
|
|
|
| particular sequence. For example, if the user likes the jet massage at a particular |
|
|
|
| moment during the sequence, and wants to keep it for an extended period of |
|
|
|
| time, the user may press the Begin/Pause pad and the system will remain in the |
|
|
|
| specific configuration until the pad is pushed again. The Begin/Pause status light |
|
|
|
| will be on when the system is in the Pause mode. During this mode, the matrix of |
|
|
|
| LED's will preview the sequence and the user may also push the SEQUENCE pad |
|
|
|
| to preview another sequence |
|
|
|
|
|
|
| 5 |
| 5.SEQUENCE Pad |
|
|
|
| The SEQUENCE pad is used to toggle between selected massage sequences. |
|
|
|
| When a sequence has been selected, the corresponding LED indicator |
|
|
|
| light. The default mode (all jets in the lounge operating) will not be indicated by a |
|
|
|
| light |
|
|
|
|
|
|
| 6 |
| 6.Massage Zone Indicator Lights (Human Figure) |
|
|
|
| When a sequence is chosen, one or more LED in the figure will illuminate |
|
|
|
| showing the active zones in that sequence. |
|
|
|
|
|
|
| 7 |
| 7.SEQUENCE Indicator Lights (1 through 6) |
|
|
|
| When a sequence has been chosen the corresponding light will illuminate. When |
|
|
|
| the default mode (all jets in the lounge operating) is selected, no light will be |
|
|
|
| illuminated. |
|
|
| 19 |
| |
