Pump Run Time

2002 Dimension One Spas Export Owner’s Manual

After setting the number of filter cycles, the top line of the Digital Display will read “SET PUMP RUN TIME”. Push the UP or DOWN pads to toggle between 30, 45 and 60 minutes. This sets the length of time the pump will run when a jets pad is pushed. For example, if you choose 45 minutes, when you push a jets pad, the pump will run for 45 minutes before shutting down automatically. When your desired pump run time appears on the Digital Display push the PROGRAM pad to select it. The pre-set factory default is 30 minutes.

Temperature Unit Selection

After setting the pump run time, the top line of the Digital Display will read “SET TEMPERATURE UNITS”. Push the UP or DOWN pads to toggle from °F to °C. When your desired temperature unit appears in the Digital Display, push the PROGRAM pad to select it. The pre-set factory default is Fahrenheit.

Vision Cartridge

After setting the temperature units, the top line of the Digital Display will read “SET VISION CARTRIDGE”. Push the UP or DOWN pads to toggle between “Yes” and “No”. If you are currently using a Vision Cartridge select yes, if not, select no. Selecting “yes” will prompt the control to notify you when your cartridge needs replacement. When your desired selection appears in the Digital Display, push the PROGRAM pad to select it. The pre-set factory default is “No.”

Digital Display (LCD) Invert

The invert feature will flip the text on the Digital Display so it can be easily read from both inside and outside the hot tub. To invert the text, simply push the “ENTER” pad three times. To return the text to its original position, repeat this process - push the “ENTER” pad three times.

Control Panel Lock

To help prevent unauthorized use of the hot tub, the control panel may be locked. When the control panel lock is engaged, all programmed or default hot tub functions will operate normally but all control pads will not operate. When the panel is locked, the Digital Display will display this message: “ALL SPA FUNCTIONS LOCKED.”

To lock the panel all the following pads must be pushed within

3seconds:

1.Push the Dimension One Spas ICON (logo) pad.

2.Push the Dimension One Spas ICON (logo) pad.

3.Push the ENTER pad.

Control Panel Unlock

To unlock the panel: All the following pads must be pushed within 3 seconds:

1.Push the ENTER pad.

2.Push the ENTER pad.

3.Push the Dimension One Spas ICON (logo) pad. When the last pad is pushed all pads will be active.

Programming Lock

The programming lock is to prevent unauthorized programming and water temperature adjustments. When the programming lock is engaged, all programmed or default functions will operate normally. Also, the hot tub user may operate the pumps, the hot tub light or view the time-of-day, but no programming changes may be made.

When the programming lock is enabled, the Digital Display will scroll “PROGRAMMING LOCKED” twice on the lower left side of the display, then a lock icon will be displayed on the right side of the Digital Display To enable the programming lock, all the following pads must be pushed within 3 seconds: