Dimension One Spas Dynamic Massage Sequencer manual NeckFlex Jet Pillow, Vision Systems

2002 Dimension One Spas Export Owner’s Manual

NeckFlex Jet Pillow

The NeckFlex Jet Pillow, Figure 2, offers five height adjustable positions to accommodate different body sizes. The standard mini directional jets can be interchanged with rotating jets and are adjustable for water volume. See your local Authorized Dimension One Spas for more information.

Figure 2. NeckFlex Jet Pillow

Ultra Pure Water Management System

The Chairman II, Caliente HP, Diplomat, Chairman, Californian, Nautilus, Aurora II, Aurora XLT and Triad II are equipped with a highly advanced hot tub water treatment method, the Ultra Pure Water Management System. Ultra Pure is an integrated water management system with ozone injection, a contact chamber, 100% filtration, and heating on demand.

CrystalZone Water Management System

Specifically engineered for Dimension One spas, the CrystalZone Water Management System found in the Arena, Triad, Caliente, and optionally on the Aurora HP, provides an integrated ozone purification and filtration for hot tubs. It maintains the pre-set hot tub temperature, without the use of a jet pump. Using a Mazzei-T ozone injector, the CrystalZone Water Management System provides cleaner water at lower operating costs. You’ll spend more time enjoying your hot tub and less time maintaining it.

Vision Systems

Vision Cartridge, an alternative purification system, can be used in conjunction with your Ultra Pure or CrystalZone Water Management Systems. The advantage of Vision over conventional halogens (bromine and chlorine) is that it will, as a result of lower chemical use, provide softer-feeling water. Additionally, low chemical levels can mean fewer dissolved solids, which results in less water chemistry maintenance. Please refer to the Vision instructions for proper installation. Also read Water Care section for more information.

Heater and Circulation Pump Control

On all Dimension One Spas, when the water temperature is 1° F (0.55° C) below the set temperature the heater will turn on and remain on until the water temperature rises to 1° F (0.55° C) above the set temperature. To prevent the hot tub from overheating, the circulation pump turns off when the water temperature rises 2° F (1.1°

C)above the set temperature. When the water temperature cools down to the set temperature, the circulation pump will turn on.

The circulation pump will run for short periods when the water temperature is 2° F (1.1° C) above set temperature to provide optimum operation. (The circulation pump is optional on the Aurora HP.)

Note

Smart Heat (Available only on Dimension One Spas)

Smart Heat optimizes heat recovery using the amperage that you have available. Along with computerized load sharing, that automatically recognizes the number of jet pumps in use, compares it with the available power, Smart Heat recognizes the difference between the set temperature and the actual water temperature, and adjusts the heater to optimize the heater output.

6