Toshiba B-680-QQ, B-670-QQ owner manual Cutter Module Media Outlet

Page 19

8. LOADING THE MEDIA

EO1-33015

8. LOADING THE MEDIA

8.The media is now loaded and the sensor position is set. Batch type:

Media

Fig. 8-6

Cutter type: Where a cutter is fitted load the media as standard and feed it through the cutter module.

NOTES: 1. Be sure to cut the backing paper of label. Cutting label will cause the glue to stick to the cutter, which may affect the cutter quality and shorten the cutter life.

2.If the top edge of label winds onto the platen in cut issue, set the DIP SW 1-5 of the B-672 to ON. For the B-682, contact your authorized TOSHIBA TEC representative to change the Operation Panel setting.

3.Use of tag paper with the thickness exceeding the specified valve may affect the cutter life.

Cutter Module

Media Outlet

Media

Fig. 8-7

8-4

Image 19

Contents 670/680-QQ Series Energy Star is a U.S. registered mark Meanings of Each Symbol Safety SummaryRequest Regarding Maintenance PrecautionsTable of Contents 7 2 T S 1 0 Q Q AccessoriesIntroduction Applicable ModelRM4SCC Royal Mail 4STATE Cutomer Code SpecificationsPrinter MSI, ITF, NW-7, CODE39, CODE93, CODE128Options Ribbon MediaFront View OverviewFRONT/REAR View Operation PanelDIP SW DIP Switch Functions B-672 onlyInterface Cables SET UP ProcedureSetting UP the Printer Requirements for OperationConnecting the Power Cord and Cables Installing the PrinterHolder Stand Installation Head Lever Position Loading the RibbonStep Loading the Media Do not Move the Media Guides using the screwLoading the Media An easy way to set the black mark sensor position Setting the feed gap sensor positionCutter Module Media Outlet Loading the Media Inserting the Optional Flash Memory Card B-672 only Inserting the Optional Pcmcia Card B-682 only CARE/HANDLING of the Media and Ribbon Cleaning General MaintenanceWhite Screw Stud Ribbon End Sensor Plate Pinch Roller Lever Covers and Panels Under the Media GuidesRemoving Jammed Media Cleaning the strip unit Cleaning the Cutter UnitThreshold setting procedure Threshold SettingError Message Problem Solution TroubleshootingError Head ErrorRibbon Error Cutter ErrorProblem Solution