Toshiba B-EP2DL manual Replacing the Peel-off Roller

2. MAJOR UNIT REPLACEMENT

EO18-33024

2.3 Replacing the Peel-off Roller

2.3Replacing the Peel-off Roller

1)Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board.)

2)Remove the two Roller Clips with a straight slot screwdriver, then remove the Peel-off Roller Ass’y.

Roller Clip

Peel-off Roller

Roller Clip Straight Slot Screwdriver

3)Remove the two Peel-off Rollers and the two Roller Clips from the Roller Shaft.

Roller Shaft

Peel-off Roller Roller Clip

4)Replace the Peel-off Roller with a new one, then reassemble in the reverse order of removal.

NOTE: Be careful of the orientation of the Roller Clips as shown in the picture below when reassembling the Peel-off Rollers.

Roller Clip

2-9