2. MAJOR UNIT REPLACEMENT
2.6 Replacing the Battery Terminal
2.7Replacing the Battery Terminal
1)Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board.)
2)Remove the Stepping Motor. (Refer to Section 2.5 Replacing the Stepping Motor.)
3)Remove the Drive PC Board. (Refer to Section 2.6 Replacing the Drive PC Board.)
4)Hold down the Hook and remove the Battery Terminal upward.
Hook
Battery Terminal
Battery Terminal
5)Replace the Battery Terminal with a new one, then reassemble in the reverse order of removal.
NOTE:
Reassemble the battery terminal so that the tubes are placed on the battery case.
Battery Case
Tube