2. MAJOR UNIT REPLACEMENT
(Revision Date: Mar. 17, 2009)
2.7 Replacing the Stepping Motor
2.5Replacing the Stepping Motor
1)Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board.)
2)Remove the two Gears.
3)Remove the two screws.
Stepping Motor
Gear
NOTE: When replacing the gear, apply a small amount of Floil (8mm3) to each Gear Stud with a toothpick, etc. by drawing a line around the part as shown below.
Gear Stud (2 places)
FLOIL
Gear Stud