Toshiba B-EP2DL manual Major Unit Replacement

Page 24

2. MAJOR UNIT REPLACEMENT

EO18-33024 (Revision Date: Dec. 16, 2008)

2.9 Replacing the Cover Open Switch and Media Sensor (Lower)

5)Remove the Cover Open Switch (L) and Cover Open Switch (R) from the Base Cover.

Cover Open Switch (L)

Cover Open Switch (R)

 

Connector

Base Cover

NOTE:

Pay attention to the following when reassembling the sensor.

Path the lead wires between the protrusions.

Do not get the lead wires into the gears.

Do not let the covers catch the lead wires.

6)Replace the Media Sensor (Lower) and Cover Open Switches (L) and (R) with a new one, then reassemble in the reverse order of removal.

2-20

Image 24
Contents EP2DL Series Page Table of Contents Procedure ChecksMajor Unit Replacement Replacing the CPU PC BoardMajor Unit Replacement Remove the Front Cover Major Unit Replacement Good Right Side Cover EO18-33024 Revision Date Dec Replacing the CPU PC Board Replacing the LCD Unit Replacing the Peel-off Roller Replacing the Peel-off Sensor Peel-off Sensor Unit ZPerform the sensor adjustment Replacing the Stepping Motor EO18-33024 Replacing the Stepping Motor Replacing the Drive PC Board EO18-33024 Replacing the Battery Terminal Replacing the Print Head Major Unit Replacement Replacing the Cover Open Switch and Media Sensor Lower Major Unit Replacement Major Unit Replacement Replacing the Media Sensor Upper Perform a RAM clear Perform the sensor adjustment Replacing the Platen Ass’y Troubleshooting Troubleshooting
Related manuals
Manual 28 pages 23.72 Kb