2. MAJOR UNIT REPLACEMENT
2.1 Replacing the CPU PC Board
11) Close the front cover.
Front Cover
NOTES:
1.Make sure that the pins on the both sides of the front cover are fit in position, as shown in the pictures below.
Pin
2.Do not reassemble the Front Cover while the Top Cover Open Button is pressed. Doing so may cause the Top Cover not to open.
Good |
No Good
Top Cover Open Button
12) Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the printer enclosure.
Fit the tabs A to C into the slots A’ to C’.
Tab A | Tab B | C’ | |
Tab C | |||
|
|
B’
A’