Toshiba B-EP2DL manual Peel-off Sensor Unit ZPerform the sensor adjustment

2. MAJOR UNIT REPLACEMENT

EO18-33024

2.4 Replacing the Peel-off Sensor

5)Remove the Peel-off Sensor.

Peel-off Sensor

6)Replace the Peel-off Sensor with a new one, then reassemble in the reverse order of removal.

NOTES:

1.Be careful of the orientation of the Peel-off Springs as shown in the picture below when reassembling the Peel-off Sensor Unit.

Peel-off Spring L

Peel-off Spring R

Peel-off Sensor Unit

2.After replacing the Peel-off Sensor, refer to the Setting Operation Manual or System Mode Manual and perform the following operations.

zPerform the sensor adjustment.

2-11