2. SPECIFICATIONS
ENGLISH VERSION
2.3 Serial Interface
2.3 Serial Interface (RS-232C) (for GH24 and GH34 models)
Item | Description |
Baud rate | 9600 bps |
Protocol | XON/XOFF, 8 bit data, Even parity, Stop bit = 1 bit |
Signals | TXD, RXD, RTS, CTS |
NOTE: This printer requires an exclusive printer cable. When purchasing it, please contact your authorized TOSHIBA TEC representative.
2.4 Radio Interface (for GH34 model)
The following specification is applicable only to the GB and QP models.
Item | Description |
Type | FM superhet UHF radio telemetry receiver (Complies with MPT1340*, |
| |
Receiving frequency | 418 MHz*, 433 MHz** |
Communication method | Unidirectional (Receive only) |
Transmission speed | 4800 bps |
Protocol | 8 bit data, non parity, stop bit = 1 bit |
Communicating distance | 3 m |
*: GB model
**: QP model
NOTE: The
2.5 Bluetooth Interface (for GH25 model)
Item | Description |
Communication method | Bluetooth V1.1 (with logo certification) |
Supported profile | Serial port profile |
Communication class | Class 2 |
Communication distance | 3m/360 degrees |
Service name | |
Device nickname | TOSHIBA TEC BT |
Flow control | Credit based flow control |
Operation mode | Slave mode |
PIN code | Not used. |
Receive buffer | 2 K bytes |
Link break time out | 20 sec. |
Inquiry control | No response to any inquiry can be made in 1 minute after the power is |
| turned ON. |
SR mode at page/inquiry scanning | R1 scan interval 1.28 sec. |
| Scan window 22.5 msec. |
|
|