Toshiba B-415 owner manual Loading the Label, How to Load the Liner Backed Label Roll

7. LOADING THE LABEL

ENGLISH VERSION EO1-33014

7.1 How to Load the Liner Backed Label Roll

7. LOADING THE LABEL

NOTES:

1.In the strip issue mode, you should use the printer with the side in which the model name sticker is attached downward because the backing paper is issued from the bottom of the printer.

2.In the strip issue mode, you can tear off the backing paper using the edge of the strip cover.

3.In the batch issue mode, you can tear off the backing paper at the perforation.

7.1How to Load the Liner Backed Label Roll

1.Place the printer on a level surface as shown below.

2.To unlock the media cover, press the two cover release catches in the direction of the arrows.

3.Open the media cover by pushing up the strip cover.

3

Media Cover Release Catch

Media Cover

1

Media Cover

Release Catch

1

2

Strip Cover

Fig. 7-1

4.Fully raise up the release lever, and then slide the paper guide (R) to the right.

Release Lever Paper Guide (R)

Fig. 7-2

E7-1