SELF-DIAGNOSTIC Test Print, For GH25 model

9. SELF-DIAGNOSTIC TEST PRINT

ENGLISH VERSION EO1-33014

9. SELF-DIAGNOSTIC TEST PRINT

4.Tear off the printed media upward or downward with the cutter.

NOTE: Do not pull the media out of the printer, as this will misalign the print position of the next label.

Media

Fig. 8-2

9. SELF-DIAGNOSTIC TEST PRINT

1.Turn the power on while pressing the [FEED] button. Three LED lamps light up. After about 5 seconds, they extinguish, then the first label of the test print is issued.

For GH24 and GH34 models

PROGRAM VERSION	FMRM0072201 V2.0 2800 (FONT:0200)(BOOT:A900)
PRINTER ID	00123
FORM VERSION	0000000000 0000000000 0000000000 0000000000
SRAM CHECK	512KB
SENSOR CHECK	R:2.9V T:0.5V P:1.9V H:+25°C A:+25°C
BATTERY LEVEL	8.3V (OVER 220 LABELS)
TONE ADJUST	+00	PARAMETER	[B-415] [PC-850] [0]
FEED ADJUST	+0.0mm	MODEL NAME	B-415-GH Series
HEAD CHECK	OK
PEEL THRESHOLD	2.0V
PRINT MODE	TPCL-LE
SERIAL NO.	3S000001
IrDA	IrCOMM

For GH25 model

PROGRAM VERSION

FMRM0072002 V2.0 2800 (FONT:0200)(BOOT:A900)

PRINTER ID

00123

FORM VERSION

0000000000 0000000000 0000000000 0000000000

SRAM CHECK

512KB

SENSOR CHECK

R:2.9V T:0.5V P:1.9V H:+25°C A:+25°C

BATTERY LEVEL

8.3V (OVER 220 LABELS)

TONE ADJUST

+00

PARAMETER

[B-415] [PC-850] [0]

FEED ADJUST

+0.0mm

MODEL NAME

B-415-GH Series

HEAD CHECK

PEEL THRESHOLD

2.0V

PRINT MODE

TPCL-LE

SERIAL NO.

3S000001

IrDA

IrCOMM

0 0 1 c c 4 0 8 4 f d

E9-1