Safety Summary | ENGLISH VERSION |
CAUTION This indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.
•Keep away from flame or other sources of heat. Failure to do this may cause fire or machine failure.
•Do not drop or shock the machine as this may cause machine failure.
•During lightening, turn off and keep away from the machine because of danger of electric shock and machine failure.
•Avoid locations subject to rapid change in temperature as this causes condensation, causing electric shock or machine failure.
•Do not damage the print head, platen or strip roller with a sharp object. Doing so may cause machine failure.
•Do not touch or contact the print head element with a metal object. Doing so may cause machine failure.
•Use the specified media only. Failure to do this may cause machine failure.
•Be sure to turn off the machine before replacing the battery, or machine failure may occur.
•Do not charge the battery near flame or under direct sunlight. High temperature may activate or dam- age the protection unit of the battery, disabling the electric charge or causing it to overheat, burst, or burn.
•Unload the battery when the machine will not be used for a long time. Failure to do this may cause machine failure.
•Keep the battery away from flame, a heat source or other locations subject to high temperature. Failure to do this may cause it to over heat or burn.
•Use the specified battery charger only. Failure to do this may cause the battery to overheat, burst or burn.
•Do not force the battery into the machine or battery charger. Doing so may cause the battery to over- heat, burst or burn. Check for the correct electrode.
•Do not connect the battery to a power outlet or a car cigarette lighter jack as this may cause the battery to overheat, burst or burn.
•Because the
Precautions
The following precautions will help to ensure that this machine will continue to function correctly.
(1)Try to avoid locations that have the following adverse conditions:
*Temperatures below
*Direct sunlight
*Excessive vibration
(2)The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild deter- gent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers.
(3)USE ONLY TOSHIBA TEC SPECIFIED media.
(4)DO NOT STORE the consumables/media where they might be exposed to direct sunlight, high tempera- tures, high humidity, dust, or gas.
(5)Any data stored in the memory of the printer could be lost during a printer fault.
(6)DO NOT open the media or battery covers and battery cover during operation. Doing so will stop printer operation.
(7)DO NOT scratch the surface of printed labels or receipt with a sharp object.
NOTE:
When the printer is not used for a long period of time, please keep it with the media cover open. Failure to do this may deform the platen by the print head's pressure.
(iv)