4. LOADING AND REMOVING THE BATTERY
ENGLISH VERSION
4. LOADING AND REMOVING THE BATTERY
4. LOADING AND REMOVING THE BATTERY
CAUTION:
1.Be sure to turn off the printer before loading the battery.
2.Use the specified battery only. Failure to do this may cause fire or electric shock.
3.In the United States, used lithium ion batteries should be returned to the store where you bought the machine. (USA only)
4.LITHIUM ION BATTERY DISPOSE OF PROPERLY
Caution: Do not handle a damaged or leaking lithium ion battery.
•Battery Performance
A fully charged battery can print 200 labels or more. Under the temperature 25°C, it can print 400 to 500 labels. (Label pitch: 63.5 mm)
1.Slide the battery cover to open.
2.Insert the battery as shown below until it goes no further.
3.Slide the battery cover back while pushing the battery, and fully close the cover until it clicks.
4.To remove the battery, gently tilt the printer while supporting with the hand.
NOTE: Care must be taken to tilt the printer. Failure to do this may cause the battery to rush out.
Battery Cover
Battery
Fig.