Toshiba 1500 SERIES operation manual Installation Precautions General

Page 13

TOSHIBA

3.0 Precautions

CAUTION

3.1 Installation Precautions (General)

 

1)Install the unit in a well ventilated location; allow at least 10 cm (4 inches) on all sides for air ventilation and for maintenance.

2)Install the unit in a stable, level, and upright position which is free of vibration.

3)Install the unit where the ambient temperature is within the correct operating range (see Specifications Section 4.0).

4)Do not install the UPS in areas that are subject to high humidity.

5)Do not allow direct sunlight to shine on the unit.

6)Do not install the UPS in areas which are subject to contamination such as high levels of airborne dust, metal particles, or inflammable gas.

7)Avoid installation near sources of electrical noise and always make sure that the unit ground is intact to prevent electrical shock and to help reduce electrical noise.

8)Do not install where water or any foreign object may get inside the UPS.

9)This UPS generates and can radiate radio-frequency energy during operation. Although RFI noise filters are installed inside the unit, there is no guarantee that the UPS will not influence some sensitive devices which are operating close by. If such interference is experienced, the UPS should be installed farther away from the affected equipment and/or powered from a different source than that of the affected equipment.

3 - 1

Image 13
Contents Series Page Toshiba Contents Section Troubleshooting Procedures Contents ContdPreventive Maintenance/Parts Replacement External Dimensions/Panel Layout/Shipping WeightsIntroduction General Safety Instructions Model Capacity Manufacturer Type Quantity Important Safety InstructionsVii When working with batteriesViii Instructions Importantes Concernant LA SécuritéPower Conditioning Power BackupTheory of Operation Application and UseAfter Uncrating Inspection of the new UPS equipmentStorage of UPS equipment AvoidInstallation Precautions General Operating Precautions Caution Prestart PrecautionsModel Number Specifications Standard Series SpecificationsUE1A1A012C6 Specifications Standard Series Specifications ContdUE1A1A006C6T UE1A1A008C6T UE1A1A010C6T Power flow in AC input mode Operation Modes AC Input Mode normal operationBattery Backup Mode Power flow in battery backup modePower flow in circuit-bypass mode Operation Modes Circuit-bypass modeSystem Protection Features Audible Alarm Functions Operation Monitoring Visual Indicator FunctionsVisual and Audible Indicator Function Chart Condition Cause Indicators Operation PatternFront Panel Layout UPS On-Line Mode DisplayRated battery voltages Battery RechargingBattery Low Voltage Tolerances Battery Backup TimeBattery Check Function System ResetPin Symbol Description DB25 Connector PinoutUPS Shutdown via RS-232C RS-232C Serial Communication InterfaceDry Contact Interface Non-Fatal Fault Mode Display Chart Non-Fatal Fault ModeFatal Fault Mode Display Chart Fatal Fault ModePreventive Maintenance Preventive and Scheduled Maintenance/Parts ReplacementFuse rating Fuse Rating ChartExternal Dimensions External Dimensions/Shipping Weights/Panel LayoutShipping Weight Panel Layout Shipping WeightsPounds Kilograms Toshiba International Corporation