6. User’s Guide to Operations
Normal ongoing UPS operation requires little or no user input. Startup and shutdown requirements of the user are discussed in this section.
6.1UPS Startup and Shutdown Starting the UPS
•Ensure that installation is correct and that the input power cable is connected to a properly grounded outlet.
•Start the UPS by pressing the On/Off button on the front panel.
•The UPS will start the inspection of internal functions, main synchronization, and inverter startup. A successful completion allows for output power via the outlets.
•During the startup inspection the LCD will display Ready On. The LED will light up when output power has started and the LCD display will show Line Mode.
•Switch on the load.
Shutting Down the UPS
•Shut off and disconnect the load.
•Press and hold the UPS On/Off button for five seconds. The alarm will sound and the UPS will shut down.
•The LCD will momentarily display UPS OFF.
Note: In emergency situations the EPO should be used.
6.2Button Operation
1.“
” is the Load ON/OFF button.
(a)Press and hold the Load ON/OFF button for at least 3 seconds to turn on the UPS.
(b)While the UPS is operating, press and hold the Load ON/OFF button for at least 3 seconds to turn off the UPS.
17