Status of the UPS, measurements, and alarms are all indicated on the LCD screen.
Tower Unit | Rack Unit |
Figure 3 Control panel
6.4Normal Display
The UPS status is shown in the normal display mode. The UPS Meters display and the Setting display may be accessed by pressing the Return button on Tower Unit and FUNC button on the Rack Unit.
6.5UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display. Press this button to scroll through the parameters.
LCD Message | Description |
O/P VOLT= xxx.xV | Shows Output AC Voltage |
O/P FREQ= xx.x Hz | Shows Output Frequency |
I/P VOL T= xxx.xV | Shows Input AC Voltage |
I/P FREQ= xx.x Hz | Shows Input Frequency |
BAT VOLT= xx.xV | Shows Battery Voltage |
O/P LOAD%= xx% | Shows Load % of Max Load |
O/P W= xW | Shows Output Watts |
O/P VA= xVA | Shows Output VA |
O/P CURR= xA | Shows Output Current |
| 19 |