Toshiba 1000 manual Front Panel Settings, P Volt SET

4.4Front Panel Settings

Listed below are the default settings of the primary UPS parameters.

Settings	Options	Default	Remarks
1) O/P VOLT SET	100V/110V/115V/120V/127V	120V	120V (FOR LV series)
(output voltage	208/220/230/240 Vac	230V	230V (FOR HV series)
set)
2) I/P FREQ SET	+/- 2%	+/- 5%	Input Frequency range in
(input frequency	+/- 5%		Free Run mode
setting)	+/- 7%
3) I/P BYPASS	+/- 10%	+10%	Input Voltage range when
SET	+10% -15%	-15%	Bypass mode is on
(input bypass	+15% -20%
setting)
4) FREE RUN	ON/OFF	ON	If ON, enable UPS runs on
SET			Asynchronous mode.
			For example:
			If input freq 55Hz
			output freq stays at 60Hz.
			If OFF, disable UPS runs on
			synchronous mode.
			For example:
			If input freq 55Hz,
			UPS will go to battery mode.
5) HE MODE SET	ON/OFF	OFF	If ON, enable UPS runs in
			High efficiency mode. The
			unit will be in bypass mode
			with 95% or higher
			efficiency.
			If OFF, the unit will be in the
			online mode with 85%
			efficiency.
6) MANUAL	ON/OFF	OFF	If ON, enable UPS switch to
BYPASS			Bypass mode immediately.

12