BACKUP TIME= xx min | Shows Estimated Backup Time in Minutes |
BAT CHARG= xx% | Shows Approximate Percentage of Battery Capacity |
TEMPERATURE= xxC | Shows Approximate Ambient Temperature |
BAT PACK NUM= x | Shows External Battery Pack Number |
RATING = xxxxVA | Shows UPS Rating |
CPU VERSION xx.x | Shows CPU Version |
6.6UPS Configurations
1)Parameter settings may be viewed from the UPS Settings display.
2)To enter the configuration mode, press and hold the Function button for one second. The first configuration parameter will be shown on the LCD display.
3)Press the Function button again to scroll through the remaining parameters.
4)Press the Enter button to select a displayed parameter.
5)Press the Function button to scroll through the options for the selected parameter. Press the Enter button to select the setting.
6)If prompted to save the selection, press the Enter button to either confirm or save the selection. See the table on page 12 for a complete listing of the
7)If there is no user input for ten seconds, the UPS will exit the configuration mode and return to normal mode displaying Line mode.
20